Totalizer gas meters - Import export

The Total-Meter™ is a fully calibrated electronic flow meter with a built-in flow totalizing function. The Total-Meter™ utilizes field-proven differential pressure flow measurement technology to accurately monitor industrial liquids or gases. The actual flow rate is displayed locally on the 4 digit LED display and is also retransmitted with a scalable 4-20mA output for remote monitoring. In addition, the Total-Meter™ tracks total volumetric consumption up to 999,999,999,999 engineering units and will communicate using the ModbusRTU protocol over RS-485/232. The Total-Meter™ is designed to be piped directly into a gas or liquid pipeline and requires minimal space. Integrated programmable flow alarm output can be configured to trigger either high or low flow alarm situations based on actual flow rates.

for small pipe size DN8~DN50 micro mass flow designed to measure the mass and standard flow in small pipe lines in general industry and laboratory

Four-channel Ultrasonic Gas Flow Meter Energoflow GFE-404 is MID certified specially designed for applications where very high accuracy is required, e.g. for custody transfer measurement of natural gas. The standard version provides an accuracy of 0.5%, flow meters with an accuracy of 0.2% can be supplied under order. Ultrasonic Gas Flow Meter Energoflow GFE-404 certified to OIML R137 class 0.5 by PTB. The flow meters provide accurate and reliable measurement of the gas flow rate in the pipeline in both directions within the range from 0.1 to 30 m / c. The flow meters are available in a wide range of sizes. The flow meters are pre-calibrated on air as per customer's requirements, pre-calibration on natural gas is provided under special order.

Energoflow GFA-202 Flow Meters can be used as part of metering units of gas distribution points, industrial enterprises and communal service installation. Flow meters are designed for use in continuous operating mode and require minimal maintenance. Flow meters can be included to the measurement networks and control systems. Flow meters has the protection marking "0ExiаIIBT4 Х " and can be installed indoors in explosions hazard zones. Flow meter consists of the electronic unit (EU) and flanged in-line section, having two pairs of inserted ultrasonic transducers as well as temperature sensor and pressure sensor.

Gas/Water Meter Box and Door are attacked by all the inclemencies of the weather that damage it on the long term while reducing their efficiency. All these problems are solved thanks to our Meter Boxes with advantages : them increases the service life of the meter. With its elegant design , reached after decades of experience, we satisfied each customer we’ve ever met. We can make assembly kit too. Customization Available On Demand !!!

VFM60MV multivariable vortex flowmeters is an integral solution for mass flow /standard flow measurement of steam and gas. Integrated pressure and temperature sensors for density compensation, so it can also measure temperature, pressure, density, mass flow and standard flow. User would only need one flowmeter to measure and read all this parameters, this advantage leads to lower cost and maintaining.

TGF600 Screw-in thermal mass flowmeters for small pipe size gas meausred Inline type can be installed/removed without stopping the line Minimum flow rate down to 0.3m/s, 1:100 super wide turndown ratio No moving part, almost no pressure loss Direct mass flow measurement, do not require temperature or pressure compensation TGF600 Series screw-in inline thermal mass flowmeters measures the gas mass flow base on thermal dispersion theory. It combines COMATE’s advanced technology on transmitter, sensor, filming and calibration, can provide stable and accurate measurement even under harsh industrial applications and require very less maintaining.