Totalizer gas meters - Import export

The Total-Meter™ is a fully calibrated electronic flow meter with a built-in flow totalizing function. The Total-Meter™ utilizes field-proven differential pressure flow measurement technology to accurately monitor industrial liquids or gases. The actual flow rate is displayed locally on the 4 digit LED display and is also retransmitted with a scalable 4-20mA output for remote monitoring. In addition, the Total-Meter™ tracks total volumetric consumption up to 999,999,999,999 engineering units and will communicate using the ModbusRTU protocol over RS-485/232. The Total-Meter™ is designed to be piped directly into a gas or liquid pipeline and requires minimal space. Integrated programmable flow alarm output can be configured to trigger either high or low flow alarm situations based on actual flow rates.

Thorne & Derrick International, based in the UK, are leading Specialist Distributors of Metering products for commercial, industrial and hazardous area applications – we supply meters for water, gas and heat (thermal energy) metering from leading manufacturers in a range of technologies including Ultrasonic, Clamp-on, Diaphragm, Rotary, Turbine, Electromagnetic (Magmeter) and Woltmann. We provide excellent customer service from our trained sales engineers specialising in recommending the optimum meter to ensure the highest accuracy and reliability of measurement – we can recommend meters to ensure compliance with approval and regulatory schemes including RHI, MID and WRAS and also specify metering products to achieve BREEAM credits for sustainable buildings.

The test bench is designed for calibration with critically operated nozzles of domestic gas meters or others such as diaphragm gas meters, ultrasonic meters, thermoelectric gas meters. The test bench is specially designed for the calibration of domestic gas meters (bellows gas meters, ultrasonic meters, thermoelectric gas meters). The test bench is modular - 1x6 to 4x6 clamping positions for the gas meters can be combined. Due to the modular design 1 to 12 gas meters can be tested simultaneously. In parallel, up to twelve additional test pieces can be adapted, run in and leak tested. A magazine consisting of three critical nozzles is used as flow transmitter. Optionally, a nozzle drum with nine combinable nozzles can be used. This allows the generation of up to 512 different flow points with highest accuracy.

for small pipe size DN8~DN50 micro mass flow designed to measure the mass and standard flow in small pipe lines in general industry and laboratory

Energoflow GFA-202 Flow Meters can be used as part of metering units of gas distribution points, industrial enterprises and communal service installation. Flow meters are designed for use in continuous operating mode and require minimal maintenance. Flow meters can be included to the measurement networks and control systems. Flow meters has the protection marking "0ExiаIIBT4 Х " and can be installed indoors in explosions hazard zones. Flow meter consists of the electronic unit (EU) and flanged in-line section, having two pairs of inserted ultrasonic transducers as well as temperature sensor and pressure sensor.

Gas/Water Meter Box and Door are attacked by all the inclemencies of the weather that damage it on the long term while reducing their efficiency. All these problems are solved thanks to our Meter Boxes with advantages : them increases the service life of the meter. With its elegant design , reached after decades of experience, we satisfied each customer we’ve ever met. We can make assembly kit too. Customization Available On Demand !!!

Energoflow GFE-202 and Energoflow GFE-201 are MID, ATEX certified state-of-art Ultrasonic Gas Flow Meters designed for accurate and reliable measurement of flow velocity, volumetric flow rate and volume of gaseous substances (gases) transported through pipelines in the forward or reverse direction. The flow meters are installed inline and supplied pre-calibrated on air or natural gas as per the customer's requirements. These flow meters can measure the flow velocity V of gas in a pipeline in both directions over a wide range - from 0.1 to 25.0 m/s (under order, special versions for measuring flow velocities up-to 35.0 m/s are available). They can be used for gas pressures as high as 160 bars and ambient temperatures from -60 up-to +70 deg. C. Besides, the flow meters provide all the traditional advantages of the pulse-time ultrasonic flow measurement technology – no pressure loss, no moving parts, easy servicing and simplicity of use.

VFM60MV multivariable vortex flowmeters is an integral solution for mass flow /standard flow measurement of steam and gas. Integrated pressure and temperature sensors for density compensation, so it can also measure temperature, pressure, density, mass flow and standard flow. User would only need one flowmeter to measure and read all this parameters, this advantage leads to lower cost and maintaining.

Tethys Oil Supplies & Services is a distributor of FMC Smith Meter® flow meters, strainers, PD Meters, and Accu-Load. Known worldwide for its ability to produce reliable, accurate and consistent measurement results, the Smith Meter® brand is one of the most accurate and cost-effective options available to the industry. In addition, the Smith Meter Guardsman™ is lightweight and compact for easy integration into packaged systems. Also available through Arm-Tex is the Smith Meter® Ultra Series. Backed by FMC Technologies, the Ultra Series is the cutting edge solutions for custody and non-custody transfer measurement applications. This non-intrusive design has no moving parts to provide a low maintenance measurement solution and offers a wide dynamic flow range, wide viscosity application range with low differential pressure. Applications include: blending, batching, dispensing, inventory control, and custody transfer of oils, solvents, chemicals, paints, fats, and fertilizers.

Venrius has a broad range of purgemeters. The purge rotameters are intended for general use as a low-cost method of flow indication. It is suitable for the majority of non-critical purge applications that do not necessarily require high flow measurement accuracy. Their primary use is to regulate small gas or liquid purge streams. They are used to keep instruments from coming into contact with hot and corrosive fluids, to keep pressure taps from plugging, to keep optical devices clean, and to keep electrical devices from igniting when they come into contact with flammable materials.

TGF600 Screw-in thermal mass flowmeters for small pipe size gas meausred Inline type can be installed/removed without stopping the line Minimum flow rate down to 0.3m/s, 1:100 super wide turndown ratio No moving part, almost no pressure loss Direct mass flow measurement, do not require temperature or pressure compensation TGF600 Series screw-in inline thermal mass flowmeters measures the gas mass flow base on thermal dispersion theory. It combines COMATE’s advanced technology on transmitter, sensor, filming and calibration, can provide stable and accurate measurement even under harsh industrial applications and require very less maintaining.