Moisture%20measuring - Import export

This measuring device is ideal for the fast determination of humidity rate in solid substances such as wood and building construction materials.

Reliable and accurate handheld tool for the lumber and woodworking industries.

Shaw Moisture Meters supply sample systems to assist with sampling direct from process lines, protecting your hygrometer from high pressures and contaminants particularly in hydrocarbon applications. These engineered solutions extract and analyse a representative sample of the air or gas, which is then either vented off to atmosphere or returned to the process. The SHAW range of sample systems has been developed throughout 60 years of experience in industrial moisture analysis and process applications. Built using the highest quality components to provide long term performance and reliability even in the toughest applications. Choose from an add on sample system suitable for your portable hygrometer, dewpoint meter, online analyser or contact us regarding a complete all-in-one system designed for your specific requirements.

Manufactured in the UK, the SDH-PSS is an effective, self-contained sampling system designed for gas or general compressed air sampling, ensuring sample pressure and flow are suitable for trace moisture measurement. Its compact size means it can be taken as close as possible to the sampling point thereby minimising the volume of the sampling arrangement. Simple to setup and install. Fully configurable with options for a filter unit and pressure regulator on a chassis made from high quality stainless steel with stainless steel fittings and pipework. Designed to condition pressurised gas samples up to a maximum of 200 barg (2,900 PSI), Various configurations are available. The hygrometer docks securely in the sample system, which sits in a rugged, anti-static, foam padded carrying case with rubber feet. With no stored energy components, the SDH-PSS is suitable for use in hazardous areas when paired with the SDHmini-Ex, making this an all in one, dewpoint measurement and sampling system.

Over time, various factors such as exposure to contaminants, age, incorrect operation, sensor deterioration, a drift in electronics or exposure to corrosive gases, can contribute to dewpoint instruments losing accuracy and reliability. To maintain accuracy and reliability, we advise an annual service and calibration. For instruments used in critical applications or aggressive environments, more frequent service and calibration intervals are recommended. Our Calibration Laboratory Engineers perform routine servicing, commissioning, fault finding, repairs and installation services in accordance with our accredited quality system. Our calibration range of -90 °C to +20 °C dewpoint is traceable to National and International Humidity Standards at the National Physical Laborarory (NPL). SHAW products are developed to be reliable, easy to install and simple to operate, We are committed to providing the highest quality products and services for accurate and reliable moisture measurement.

Reliable, accurate and offering superior senstivity, repeatability and speed of response. The SDT-Ex is suitable for continuous measurement of trace moisture in industrial process gases. This 3 wire, 4-20 mA, loop powered dewpoint transmitter utilises the ultra high capacitance SHAW moisture sensing technology and is certified intrinsically safe to ATEX and IECEx standards. Suitable for use in hazardous areas using a signal isolator and ideal for hydrocarbon, petrochemical and hydrogen applications. The SHAW SDT-Ex incorporates the unique AutoCal function designed by SHAW, allowing users to ensure accuracy between laboratory calibrations. Fully self-contained within a robust housing, the stainless steel construction provides weatherproof protection to IP66 (NEMA 4X). The output is configurable in 5 different units and various dewpoint ranges are available covering an overall range from -100 °C to +20 °C (-148 °F to +68 °F) dewpoint with an accuracy of ±2 °C (±3.6 °F) dewpoint.

A hand held hygrometer suitable for a wide range of industries. Designed for quick, reliable spot check measurements of trace moisture in gases and dry compressed air. Utilising the proven SHAW ultra high capacitance aluminium oxide sensor, desiccant dry down head assembly and AutoCal function. The intuitive menu system allows simple operation of the instrument and can be viewed in 10 different languages, has real time graphing, screen shot features and selectable engineering units. The rechargeable lithium-ion battery provides over 150 hours of continuous operation on a full charge and the instrument is charged via USB or a plug type to suit your geographical location. Incorporating Bluetooth interfaces for connectivity and printing and advanced data logging with download to PC capability, up to 300,000 readings can be captured and displayed via USB. Suitable for use in hazardous environments, the SDHmini-Ex is certified intrinsically safe to ATEX, IECEx and UL standards,

The TOR-2 transformer oil express-tester is designed to determine the moisture and hydrogen content in mineral insulating oils and ether based insulating oils. Moisture and hydrogen content is measured in parts per million (ppm). Knowing the content of hydrogen and moisture in the oil, as well as the rate of parameter change, it is possible to detect problems developing in the transformer in advance and to take timely measures to prevent damage to the transformer. Moisture measurement The device measures the activity of the water using a capacitance sensor, which ensures stability over time and contamination resistance. The oil temperature is also measured. The moisture content is calculated from these measurements. Hydrogen measurement A highly selective solid state sensor immersed directly in oil is used to measure hydrogen content. The sensor ensures accuracy and reliability of direct measurements.

TOR-1 is a device for quick and precise measurement of the moisture content in insulating oil, even in miniscule quantities. The high sensitivity and excellent long-term stability make this tester an ideal solution for constant control of moisture content in transformer oil. Operating principle The amount of water in the oil can be described as an absolute value in ppm or a relative value of aw: ppm is the ratio of moisture weight to oil weight; aw is the actual water content as a percentage of water content in fully saturated oil. A value of aw = 0 corresponds to completely dry oil, while aw = 1 corresponds to a completely saturated oil. The measurement with this sensor is based on exceptional long-term stability and resistance of capacitance sensor elements to contamination. The measured physical properties are water activity w and temperature T. Using these parameters, the device calculates the amount of water (ppm) in mineral transformer oil.

Grain moisture meter for maize, rye, Triticale, wheat, durum wheat, spelt, barley, oats, rape, pumpkin seeds, field peas, soybeans, scarlet runner beans, horse beans, sunflower seeds, Jatropha, peeled and unpeeled raw coffee, roast and ground coffee, peeled, unpeeled and brown rice, poppy seeds, millet, sorghum millet, peeled buckwheat; further species on request With reference calibration curve and customer calibration function The water content can immediately be read off the large, well-lit display of the universal grain moisture meter and saved, edited or printed out via the integrated datalog if required. - no time-consuming preparation of samples necessary - non-destructive measuring technique - whole grain moisture meter

The sensor is used to measure the moisture of concrete aggregates and is typically installed over a silo belt feeder or a conveyor belt or under a silo trap door to have a view on a moving sample. Current loop is available for feeding the data into your PLC, and a software licence for a PC to calibrate the sensor as well as view and store the data is also included in the system. There are no moving or wearing parts and as the measurement is done by a non-contact remote sensor, the maintenance cost will be very low.

Microwave sensor for continuous moisture measurement in dry bulk solids and installation on conveyor belts, screw feeder or hoppers. Microwave based sensor for high resolution and accuracy. • highly resistant to abrasion • integrated temperature reading • flow detection function • moisture ranges 0 65 % • measurement accuracy 0.1 % • ATEXcertified

Sensor for continuous moisture measurement in dry bulk solids and installation on conveyor belts, screw feeder or hoppers. Microwave based sensor for high resolution and accuracy. • highly resistant to abrasion • extended measurement range, up to 85 % moisture • high temperature version up to 190 °C • measurement accuracy 0.1 % • recording of surface moisture and capillary moisture

Microwave sensor for continuous moisture measurement in dry bulk solids, with flow detection and process temperature measurement. • highly resistant to abrasion • integrated temperature reading • flow detection function • measurement accuracy 0.1 % • ATEXcertified

Raw materials arriving at our warehouse come to the quality control laboratory in accordance with the sampling procedure, and if the analysis results are found appropriate, their entry into the company is approved. Raw materials are analyzed based on European Pharmacopoeia 10.8 methods, based on certain control criteria. These controls; visual control, solubility control, density determination, moisture determination, pH determination, viscosity determination. After the approvals, weighings are carried out in accordance with GMP in a special weighing room equipped with HEPA filters and humidity controls. The controls made on finished products are; visual control, solubility control, organoleptic control, volumetric and quantitative control, moisture determination, pH measurement, density determination, viscosity determination, hardness determination, diameter-thickness measurement, quantification (HPLC), gas chromatography.

Measuring the moisture of the flowing raw material with high precision. Calculation of the amount of water to be given according to the desired humidity amount in lt/hour Control of the calculated amount with the electronic water flow meter placed in the system Calculation of faults from the operator panel Instant monitoring of raw material moisture in % Ability to instantly monitor the amount of water given in lt/hour Ability to monitor the amount of water that needs to be given in lt/hour Ability to monitor the total amount of water given in liters. Ability to connect the system to the computer at any time and perform all controls from the computer without having to go near the device.

Portable moisture meter The Textometer DMB is a mobile handy device for measuring moisture on textile webs and bobbins on a wide variety of versions. It determines the moisture content of raw materials, semi-finished products and finished products precisely and quickly.

The last generation of Cairsens® micro-sensors for Particulate Matters (PM) monitoring operates without any influence from moisture in ambient air. They measure PM1, PM2.5 and PM10 concentrations.

The T610 is a handheld measuring instrument from the Trotec MultiMeasure family, used for quick non-destructive moisture measurement up to 300 mm. Another advantage of the process, aside from the measuring depth, is its independence from the level of salt content in the material. This creates no dissimilarity to the microwave technique, whether it is an older or a new building being gauged. Since the unit’s screen can show two values, for purposes of results evaluation, a function value can be indicated at the same time as the present measured value, if needed. The T610 moisture meter can be linked to a PC through a USB cable. Due to the MultiMeasure Studio Software, the gauged values of the device can be transported online and in real time to the PC. A few practical benefits: German industrial design in robust, premium two-component construction with IP54 type of protection

DL200P professional data logger is used for inspecting production processes, reliable climate logging, determination of material moisture and practical data readout using externally connectable sensors and USB or LAN. The USB adapter supports long term logging. The instrument is provided with external measurement sensor for measuring surface, air and material temperature and wood and building moisture, internal sensor (temperature) working on NTC principle measures in the range 20 °C to +50 °C, accuracy of ±0.3 °C and display resolution of 0.1 °C, internal sensor (moisture) working on capacitive principle measures in the range of 10 to 95 % RH, accuracy of ±2 % RH and display resolution of 0.5 % RH and external electrodes measuring wood and building moisture works on principle of resistance measuring method, measure in the range of 15 to 100 digits and accuracy of ± 3 digits.

The onion planter is very simple to use. First of all, the seed tank of the machine is filled and the soil regulating mechanism is activated. Then, the moisture sensor measures the moisture level of the soil and the sowing amount of the seeds is adjusted according to the moisture level of the soil. onion planter, It sows the seeds in the soil regularly and regulates the soil, ensuring that the seeds are well placed. The use of onion planter ensures good seed placement by providing water and regulating the soil to increase soil moisture if the soil moisture level is low. In this way, soil moisture level ensures good seed placement and growth. The onion planter has a special sowing mechanism that sows the seeds in the soil regularly. The onion planter has a special seed storage and a special soil regulation mechanism. This mechanism

Grain silo accessories have different functions and may help to improve the efficiency, safety and effectiveness of grain storage and handling operations. We offer a full line of grain silo accessories to fit your needs and increase your project profitability.The slide is an inner conduit situated on the roof and wall of the silo to make the product slide down homogeneously to prevent breakage during loading (of the silo). Level sensors We offer instruments that are able to measure the product level at fixed points or continuously. We manufacture supports for the different options as well as for a completely integrated system. Thermometry systems Silos Spain offers a grain temperature and moisture measuring, monitoring and control system for the inside of the silo.

The easy-to-use Vaisala HM40 is a compact and portable humidity meter that provides reliable measurements in a wide range of applications. It is the ideal spot-checking tool for everything from structural moisture measurement and air conditioning systems to humidity measurement in industrial production processes and life science applications. The HM40 has a large, user-friendly graphical display and easy-to-use push buttons. In addition to relative humidity and temperature, the HM40 provides five calculated humidity parameters, all of which are available in metric and non-metric units. Included in delivery is a certificate of calibration which is traceable to national and international standards. There are four different models available: HM41, HM42, HM45, and HM46. Calibrating the HM40 is easy. The meter or the probe can be sent to a Vaisala Service Center for recalibration. Alternatively, calibration can be completed on site by users with a humidity reference such as the...

Moisture meter Name: RC-1E wood moisture meter - Industrial & Mill Material: Wood, timber, lumber Mc: 6%-80% 3 range scale on wood: 6-11%, 11-25%, 25-80% Calibrations: Wood Overview Clad in a durable and beautifully finished hardwood case, the RC-1E’s classic design and wide moisture measurement range make it a valuable addition to your toolkit. The RC-1E has been a favourite among dry kiln operators for years! Your Benefits: Easy-to-read analog display Measures moisture in Douglas Fir using a three-range scale (6%-80%, 6%-11%, 11%-25% , and 25%-80%) Also available with Southern Pine correction as RC-1E/SP Built-in calibration check Built-in battery check Auto shut-off timer Size: 17x20x8cm (6 1/2" X 8" X 3") Weight: 1,5Kg. (3 lbs. 8 oz.) Rugged construction ensures years of reliable use 9V battery 1-year warranty Special Packages: Moisture meter package RC-1E/PKG: Includes meter, 26-ES electrode and extra 496 pins for the 26-ES hammer electrode

Moisture meter Name: QuickNav building materials moisture meter - Restoration Material: Floorings, floors, wooden floors, wood, walls, drywall, concrete, concrete slab, insulation, plaster, building materials Mc: 6-60% MC wood scale 0.1-6% drywall scale Scan range of 0-300 numerical reference scale Calibrations: Wood, Drywall Overview QuickNav offers the same high performance pin mode, scan mode, and thermo-hygrometer as our industry leading NavigatorPro, in an easier to use format. The QuickNav will instantly calculate dewpoint, grains per pound (GPP) and vapor pressure for fast, accurate moisture measurement. If you are looking for the versatility of a 3-in-1 meter and do not need to store and download reading, QuickNav is the answer! QuickNav, Delmhorst’s easy to use 3-in-1 meter, offers pin mode, scan mode, and thermo-hygrometer in a single handheld unit. Scope of Supply: QuickNav moisture meter with R/H sensor Rugged carrying case 2-E short pin probe Optional: 26-ES hamm

Moisture meter Name: Cotton moisture meter, C-2000 Material: Lint cotton, Seed cotton, Wool, Viscose/Rayon, Yarn, Bales, Modules Mc: 4-16% on lint cotton 6-20% on seed cotton 12-30% on wool 6-25% on viscose/rayon Calibrations: Lint cotton, Seed cotton, Wool, Viscose/Rayon Overview With the C-2000 moisture meter from Delmhorst, you can effectively measure moisture content, ensuring high-quality cotton every time. Cotton ginned at the appropriate level of moisture produces the longest and strongest fibers. The newly designed C-2000 utilizes the relationship between moisture content and electrical resistance to effectively measure the moisture content of cotton fibers. The C-2000 Delmhorst moisture meter including the functionally designed case with built-in handle puts controls at your fingertips. Your Benefits: Bright, clear digital display Four separate scales for testing lint cotton, seed cotton, wool and viscose/rayon Audible, adjustable alarm alerts you when your pre-selecte

Moisture meter Name: Reed moisture meter, F-2000R Material: Reed, Thatched roofs, Plywood, Fibreboard Mc: 6-40% on reed Calibrations: Reed Overview The quality of reed, as a completely natural product, can vary according to harvest, weather and the quality of the soil and the water etc. Professionals know how to judge the quality of reed. In order to obtain a guaranteed quality, the Delmhorst moisture meter F-2000R is a valuable and reliable tool to proof the moisture content. This handy moisture meter is developed especially for measuring moisture content in reed and can also be used for reference measurements on plywood and fiberboard. Your Benefits: Bright, clear digital display Averages up to 100 accumulated readings Displays average and highest of accumulated readings Mo/isture Range: 6%-40%.on reed Built-in calibration check Audible, adjustable alarm alerts you when a pre-selected MC has been reached Operating Temperature: from 0°C to 50°C Size: 20x804cm (8x3x1⅝”) Weight:

Moisture meter Name: G-79 gypsum moisture meter - Inspection Material: Gypsum, Gypsum Plaster, Plaster, Masonry Mc: 0.2%-1% 1%-8% 8%-50% Calibrations: Gypsum Overview The G-79 was designed specifically to read a wide range of moisture on gypsum. One of our first meters to feature our exclusive gypsum scale, the G-79 is still a favorite for its large analog display and classic design. Your Benefits: Easy-to-read analog display Measures moisture in gypsum using a three-range scale: 0.2%-1%, 1%-8%, and 8%-50% Built-in battery and calibration check Auto-shutoff timer saves battery life Size: 19x10x7 cm (7 3/8” x 3 7/8” x 2 3/4”) Weight: 450 gr. (1 lb) Rugged construction ensures years of reliable use Sturdy plastic carrying case 9V battery 1-year warranty

Moisture meter Name: BD-10 building materials moisture meter - Inspection Material: Floorings, Floors, Walls, Drywall, Ceilings, Building materials, Wood Mc: 6-40% on wood 0–100 reference scale for non-wood building materials Calibrations: Wood Overview Easy to operate and easy to read, the BD-10 measures moisture in wood and other non-wood building materials. For those who prefer an analog display, the BD-10 is a great alternative to the digital BD-2100. The BD-10 is a great entry level meter, and is ready to go with a single button press! Your Benefits: Easy-to-read analog display Two scales: • Wood Scale - 6% - 40% moisture range. Use for flooring and building material such as wood studs, floor joists, subfloors • Reference Scale - Reads from 0 - 100 on a relative basis. Use on non-wood materials such as concrete, plaster, and insulation Built-in calibration check Integral contact pins mounted on top of meter provide 8mm (5/16”) penetration Built-in connector accepts any De