Plate exchangers - Import export

•  operating temperatures up to 600°C (standard) •  completely made of stainless steel •  heat recovery factor up to 85% •  pressure-resistant up to 150 mbar •  completely welded •  high degree of efficiency •  without seelings  •  up to 100% gas-tight •  low maintenance •  small construction volume •  flexible coordination due      to single-item or small-lot production •  distance between plates from 3.5 mm to 7 mm •  available in the structural shapes K, L, U and LU  •  complete seperation of the two gas flows •  different current lines possible •  different volume flows for exhaust and feed air,       applicable for the temperature control of useful heat Structural shape In principle, the shape is arbitrary.  The choice takes place after consulting with the customer and with similar power are no costs involved. It depends on the technical demands of the application.  The structural shape X (crossflow) isn't possible with the ´ THERMO GAS System.     Shape LU  This structural s

•  operating temperatures up to 600°C (standard) •  completely made of stainless steel •  heat recovery factor up to 85% •  pressure-resistant up to 150 mbar •  completely welded •  high degree of efficiency •  without seelings  •  up to 100% gas-tight •  low maintenance •  small construction volume •  flexible coordination due      to single-item or small-lot production •  distance between plates from 3.5 mm to 7 mm •  available in the structural shapes K, L, U and LU  •  complete seperation of the two gas flows •  different current lines possible •  different volume flows for exhaust and feed air,       applicable for the temperature control of useful heat no costs involved Shape U    This structural shape is especially qualified for small plate heat exchangers. This structural shape is although qualified for plate heat exchangers which should streamed vertically.

•  operating temperatures up to 600°C (standard) •  completely made of stainless steel •  heat recovery factor up to 85% •  pressure-resistant up to 150 mbar •  completely welded •  high degree of efficiency •  without seelings  •  up to 100% gas-tight •  low maintenance •  small construction volume •  flexible coordination due      to single-item or small-lot production •  distance between plates from 3.5 mm to 7 mm •  available in the structural shapes K, L, U and LU  •  complete seperation of the two gas flows •  different current lines possible •  different volume flows for exhaust and feed air,       applicable for the temperature control of useful heat Structural shape In principle, the shape is arbitrary.  The choice takes place after consulting with the customer and with similar power are no costs involved. It depends on the technical demands of the application.  The structural shape X (crossflow) isn't possible with the ´ THERMO GAS System.  Shape L    This plate heat exc

•  operating temperatures up to 600°C (standard) •  completely made of stainless steel •  heat recovery factor up to 85% •  pressure-resistant up to 150 mbar •  completely welded •  high degree of efficiency •  without seelings  •  up to 100% gas-tight •  low maintenance •  small construction volume •  flexible coordination due      to single-item or small-lot production •  distance between plates from 3.5 mm to 7 mm •  available in the structural shapes K, L, U and LU  •  complete seperation of the two gas flows •  different current lines possible •  different volume flows for exhaust and feed air,       applicable for the temperature control of useful heat Structural shape In principle, the shape is arbitrary.  The choice takes place after consulting with the customer and with similar power are no costs involved. It depends on the technical demands of the application.  The structural shape X (crossflow) isn't possible with the ´ THERMO GAS System.  Shape K    An absolute classic

Working pressure up to 30bar Temperatur up to 195 °C Maximal 300 plates Various brackets Special versions on demand

Temperation of fluids Pillow plates are used everywhere where liquids must be temperated. In dependence of application the liquids can be cooled or heated. Cause of this wide range of applications pillow plates are used in the process industry, in the cooling industry and in a lot of other industries. Pillow plates are also know as heat exchanger plates, evaporator plates, cooling plates /sheets and thermo plates / sheets. Pillow plates as air-/water-heat exchanger Additionally to the temperation of liquids pillow plates are also used as air-/liquid heat exchangers. In case of polluted or wasted air and if there are high demands for cleaning, more and more pillow plates are used as air-/water-heat exchanger. The large exchange surface and the good possibilities for cleaning are important features for this type of heat exchanger.

Für den Inhalt dieser Seite ist eine neuere Version von Adobe Flash Player erforderlich. UNEX brazed plate heat-exchangers are made of high quality, pressed stainless steel plates. These high-grade steel plates are hard-soldered by means of pure copper / lead flux using the vacuum method to produce a compact unit. Hard-soldered heat-exchangers are pressure vessels. In order to meet the safety regulations for pressure vessels, each heat-exchanger is submitted to a pressure and a leak test. All products are designed individually for the appropriate application and manufactured accordingly.

High performance plate type heat-exchangers consist of a number of formed, sealable heat-exchange plates according to the respective requirements. The alternating pressed plates and channel spacing cause highly turbulent flow behaviour, optimal self cleaning effect and highest possible heat transfer. Use of high-grade materials such as titanium, titanium palladium, highly alloyed steels and even a UniCarb carbon/graphite version help ensure UniGasket heat-exchangers are extremely economical compared to other heat-exchanger types. The plates are clamped to a rack between frame plate and pressure plate by means of clamping bolts.

Generate cold water / flake ice continuously Proven use Falling film chillers have been used in various industrial sectors for many years. Water runs over the heat exchanger plates from a trough arranged above the heat exchanger plates. This enables a continuous heat transfer between the water and the cooling medium. Outstanding advantages The arrangement of holes in the upper tub enables targeted water distribution on the heat exchanger plates. The construction using a perforated tub has the further advantage that no contamination occurs and the liquid to be cooled is evenly distributed. Made of stainless steel The trickle cooler is made entirely of stainless steel. You can choose between different materials (see data sheet). Low boiling delay Our trickle coolers are characterized by the fact that the boiling delay is low in flooded operation, whereby overheating can be selected in dry expansion operation.

We have all types of industrial heat exchangers, including: plate and frame shell and plate shell and tube fin/fan They’re refinery-grade, thoroughly cleaned, pressure tested and certified contaminant-free before each use. Capable of handling temperatures from -50ºC to +300ºC, they can also accept volatile gases and liquids, high pressures (up to 40 barg), hydrocarbons, sea water, effluent and brine. With a wide range of supporting ancillaries we can connect our heat exchanger units into any system design with minimum disruption. Heat exchanger hire with expert service support – every time Whether you’re facing emergency bottlenecks, turnarounds or seasonal cooling needs, our process engineers will work closely with you to find the best solution. They’ll visit your site, assess your needs, then design and size your project using their experience, simulation software and stream physical properties. We can also assess the performance of existing heat exchanger

The Befort measuring magnifier design provides for a parallaxfree reading. Measuring magnifiers are available with 6, 8 and 10fold magnification. Measuring plates are exchangeable.

The UniWeld combines the advantages of conventional shell and tube heat-exchangers with spiral and plate heat-exchangers due to its design and construction. This mixed construction is based on the design of the heat-transfer channels, which are on one side in the tube design and on the other side in a plate heat-exchanger. UniWeld Hybrid exchangers utilise in this way the advantage of tubular heat-exchangers (high temperature, pressure resistant and solid construction) and plate heat-exchangers (high heat transfer, minimal space and low logarithmic temperature difference) in a compact system. Other advantage compared with gasketed plate heat-exchangers is the safe splitting of the 2 media at pressures up to 80 bar and between -200°C and +900°C.

With wall plate | lockable closing plate | exchangeable pump | flexible dosage quantities | for all conventional 500 and 1.000 ml bottles Measurements in mm (W x H x D): 105 x 350 x 222 Universal Arm Lever Dispenser, ABS, silver, with drip tray Universal Arm Lever Dispenser, ABS, silver 1.000 ml bottle included in delivery · including adapter for 500 ml bottle

With wall plate | lockable closing plate | exchangeable pump | flexible dosage quantities | for all conventional 500 and 1.000 ml bottles Measurements in mm (W x H x D): 105 x 350 x 222 Universal Arm Lever Dispenser, ABS, white, with drip tray Universal Arm Lever Dispenser, ABS, white 1.000 ml bottle included in delivery · including adapter for 500 ml bottle

Polyester heaters also referred to as Polyester film heaters or Polyester foil heaters consist of an electrically conductive ink between two insulating respectively carrier layers of polyester. With a maximum size of 600 x 1000 mm, their average height is only 0.2 mm. As the picture examples show, practically any shape and type of cut-out is possible. Polyester foil heaters are resistant to permanent temperatures of up to 90°C (max. 100°C for short periods). It is generally not possible to predict which temperature a Polyester heating element will reach in the application, as there are extremely many influencing factors. These include not only the power, but also the mass and type of goods to be heated, the ambient temperature, air currents, the type of mounting and, of course, the control technology. Typical applications for Polyester heaters are e.g. cup warmers in coffee machines, mirror heaters, plate heat exchangers, flat applications with a target temperature below 90°C.

At Aldea, we're committed to environmental responsibility with R290 gas to reduce carbon emissions. Our Bigblue devices operate efficiently (-25°C to 43°C), ensuring high outlet water temperatures. Using superior inverter compressor technology, they cut electricity bills. Equipped with high-quality components, including advanced PCB cooling and state-of-the-art evaporators, they guarantee efficient heating, hot water, and cooling. Certified with WaterMark, our double-row plate heat exchangers meet top standards. Compatible with remote monitoring and control systems, our heat pumps offer easy management. With cloud technology, users can remotely access parameters, ideal for industrial facilities or hotels.

At Aldea, we're committed to environmental responsibility with R290 gas to reduce carbon emissions. Our Bigblue devices operate efficiently (-25°C to 43°C), ensuring high outlet water temperatures. Using superior inverter compressor technology, they cut electricity bills. Equipped with high-quality components, including advanced PCB cooling and state-of-the-art evaporators, they guarantee efficient heating, hot water, and cooling. Certified with WaterMark, our double-row plate heat exchangers meet top standards. Compatible with remote monitoring and control systems, our heat pumps offer easy management. With cloud technology, users can remotely access parameters, ideal for industrial facilities or hotels.

You need to replace your low pressure exchanger? Need a more efficient heat exchanger?

Stainless steel refrigerated 40 bar air dryer with the plate heat exchanger, moisture separator, interconnecting piping and flanges, all made from stainless steel to prevent corrosion. Refrigerant gas is ozone friendly R134a or R404a. Dust pre-filter providing 1 micron filtration and integrated in the air dryer. Dew Point Alarm -option- displayed on compressor control panel and on dryer unit to help maintain the quality and security of the air supplied for blow moulding. Condenser is air cooled, but water-cooling is available on request for hot areas over 40°C. Coolant compressor is fully hermetically sealed with current and thermal overload protection. Pressure dew point is 3°C with 35°C compressed air inlet temperature. See our certifications

Our brazed plate heat exchangers offer customized solutions for a wide variety of applications. Thanks to the automated production and compact design of our brazed plate heat exchanger series, we can put together an individual heat exchanger for you within a very short time. The latest technology and decades of experience of successful applications guarantee highest quality, cost efficiency and reliability.

Our gasketed plate heat exchangers combine passion, scientific curiosity and technological expertise. The facts: High efficiency at low operating costs, versatile application possibilities with lower investment costs and maximum flexibility. Our efforts to continuously develop the gasketed plate heat exchanger-series further are aimed at meeting your thermodynamic and hydraulic performance needs and to ensure maximum economic efficiency. Our wide range of plate corrugations, connection sizes, materials, plate lengths and widths enable an ideal configuration according to your exact requirements. Additionally, our gasketed plate heat exchangers come with a maintenance-friendly assembly and sealing technology, ensuring low service and maintenance costs.

Our fully-welded plate heat exchangers make a convincing case due to their minimal size, outstanding thermal transfer coefficients and comparatively minimal investment costs. They are particularly robust and require only minimal cleaning and servicing. Their design advantages come into play especially in areas, in which, in addition to the output, load capacity is also a requirement.

Modular construction High-end Standard 6 sealing unit Narrow sealing unit with ultrasonic sealing system Pneumatic hold-down device Pneumatic side pusher with opposite buffer plate Signal exchange via 16-pin contact Easy accessibility and tool-free disassembly of strap path components Low-wear DC drives with integrated electronics Stepless turnable operation panel (ECOB) for many-sided operation Adjustable strap tension via operation panel Programmable strap tension value Switching from maximum to material-friendly Eco-speed in the control Cycle counter integrated in the control Quick strap coil change Strap coil changeable from the front and the side Automatic strap threading system Strap end detection with ejection of remaining strap Automatic strap loop ejection Extremely low energy consumption Stand-by mode 4 castors, 2 of them lockable CE marking inclusive conformity declaration Structural painture in RAL 5010, gentian blue

Plate heat exchanger

ProArc Drill+ Gantry type auto drill machine is an automatic, efficient and high performance CNC drilling machine. Drilling width from 1,700mm~7,200mm Drilling length depends on request. It constituted by: 1. IPC based CNC controller 2. Servo Z-axis lifter 2. Servo drill spindle 3. Auto tool length detector

ATCINT start to production all kind of eutectic plates, mostly transport and distribution of ice-cream and frozen foods must meet many different requirements while maintaining efficient and constant low temperatures. The refrigerated bodies with eutectic plates are renowned within the market as being highly recommended, high-performance technology. Eutectic plates is also becoming more useful for multi-temperature systems and for fresh food delivery. Benefits of eutectic plates ; low cost , low maintenance and high environmental, no emissions.one through plates, which have been pressed. The hot and cold medium flows through between each of the plate and then they Exchange their heat without mixing each other.

DC inverter Heat Pump, with the advanced DC inverter and EVI technology, can save you 80% heating cost compare with the traditional heating device like gas/fuel boiler and electrical heater. It heats fast and works perfectly with the radiator and floor heater to provide you a comfortable living environment even in very cold winter. It is one of the best heating devices available today. Main Features 1) Twin rotary compressor with inverter control – DC inverter technology control the heat pump output according to the household's energy requirements. Low waste of the power! 2) Electronic Expansion Value allows the accurate refrigerant go through under different working conditions. 3) Intelligent controller and LCD displaying. 4) Safely operation with multi-protections. 5) Auto defrosting function. 6) Hydrophilic coating air exchanger and plate heat exchanger all available. OPTIONAL: R410a, R22, R407c refrigerant is available.

DC inverter Heat Pump, with the advanced DC inverter and EVI technology, can save you 80% heating cost compare with the traditional heating device like gas/fuel boiler and electrical heater. It heats fast and works perfectly with the radiator and floor heater to provide you a comfortable living environment even in very cold winter. It is one of the best heating devices available today. Main Features 1) Twin rotary compressor with inverter control – DC inverter technology control the heat pump output according to the household's energy requirements. Low waste of the power! 2) Electronic Expansion Value allows the accurate refrigerant go through under different working conditions. 3) Intelligent controller and LCD displaying. 4) Safely operation with multi-protections. 5) Auto defrosting function. 6) Hydrophilic coating air exchanger and plate heat exchanger all available. OPTIONAL: R410a, R22, R407c refrigerant is available.

Type: K 55 Manufacturer: APV Description: Plate heat exchanger