Pneumatic - Import export

Our company offers BT series belt dryers from GermanSTELA Laxhuber GmbHand ATSS series from Polish company AMS elektronik. They are equipped with our proprietary control system and are designed for drying shredded biomass, such as sawdust, microchips, straw, etc. They feature a lower temperature of the drying factor than in drum dryers. The drying factor can be hot water with a temperature of up to 90°C, a glycol-based heating fluid with a maximum temperature of 120°C or, just like in drum dryers, hot air, but not exceeding 100°C.The upper temperature limit of the drying agent is imposed by the physical and chemical properties of the belt material. Belt dryers in the BT and ATSS series can achieve a capacity of 2 to 15 t/h.

CSB series drum driers manufactured by our company with a capacity of 2 to 15 t/h are intended for drying chipped biomass, including sawdust, microchips, straw, etc. All models of CSB series drum dryers are adapted to work with heat generators for both wet (humidity up to 55%) and dry biomass (humidity up to 20%). Our dryers are designed with a view to maximally increase the level of safety during their operation which is guaranteed by the significant reduction in the temperature of the drying agent, the application of a flap automatically cutting off the flow of the drying agent to the drum of the dryer and the implementation of a modern fire protection system and an exhaust gas purification system in all dryer models.CSB series drum dryers feature a solid construction and aesthetic design. They work stably and efficiently.

Skorpion 650 EB is a stationary drum chipper designed for chipping flat edgings, round timber, various types of furniture and sawmill waste of a width to 650 mm. The drive section of Skorpion 500 EB chipper is a 90 or 110 kW slow-running electric motor. In contrast to high-speed motors, this motor is features more stable operation and higher torque. A slow-speed motor with the same power achieves greater energy transmission, and by increasing the diameter of the pulley on this motor, the service life of the V-belts is extended. The cutting system of the chipper includes a drum with 2, 3 or optionally 4 cutting knives and 1 counter-knife. Screen used in the construction of this chipper ensures high regularity in size of the product. The required size of chips can be obtained by adequate configuration of suitable number of knives on the drum and the diameter of holes in the screen.

Our vibrating screens are designed to sort loose materials into fractions whose size depends on the number of sieves used and the grates size used in the aforementioned sieves. It is easy to operate with a simple design and, thanks to its compact and closed construction, takes up little space in the processing line. Flexible sleeves provide the connections between the screen and the feeding and receiving equipment.Moreover, it is possible to manufacture the screen with a design that prevents dust from entering the machine. The screens have a closed housing made of S235 structural steel. Depending on needs and application, they can offer capacities from 2 t/h to 25 t/h.

Redler type chain conveyors are designed for horizontal and inclined (up to 60°) transport of bulk materials such as pellets, sawdust, wood dust, wood chips etc. They are used as devices for loading and unloading silos, hammer mills, pellet mills and simultaneously for combining separate sections of technological lines. The drive section is equipped as standard with NORD company gear motors, rotation monitoring sensors and inspection hatches with overflow sensors. Drive shaft, on which flywheel is installed, is mounted in high-quality self-aligning ball bearings (SKF or SNR) Thanks to its construction tensioning section ensures constant optimum chain tension. Intermediate sections have length of 2000 mm as standard, but if necessary, section with non-standard length can be made. Bottom of conveyor is lined with antistatic, wear-resistant material (polyethylene PE 1000), which ensures low noise level.

Belt conveyors(also sometimes called conveyor belts) are widely used in industry (as part of various production lines), logistics (equipment for warehouses and sorting plants), construction, trade, etc. Belt conveyors are designed for horizontal transport of various bulk materials such as pellets, sawdust, wood dust, wood chips etc. They are used as devices for loading and unloading silos (just like other types of our conveyors such as chain conveyors). Depending on the requirements and purpose, belt conveyors could work with capacities from 25 m3/h to 250 m3/h. Belt conveyors consist of drive section, tension section and intermediate sections. The number of intermediate sections depends on its length. Conveyors are equipped with multi-layer conveyor belt, driven by drive section and moving on rollers. Conveyor housing is made of structural steel with Magnelis® coating. Width of conveyor depends on required capacity.

Screw conveyorsare used for transporting sawdust, wood chips, pellets and other bulk materials. Conveyor housing is made of structural steel with Magnelis® coating. Wormwheel is made of thick-walled steel pipe with 10 mm thick spiral welded to the pipe. End necks welded on both ends of the wormwheel are designed to be mounted in high-quality self-aligning ball bearings (SKF or INA/FAG) with UCF housing. Additionally, our screw conveyors are equipped with rotation monitoring sensors and inspection hatches with overflow sensors.Depending on the requirements and purpose belt conveyors could work with capacities from 15 m3/h to 100 m3/h. Screw conveyors (also known as auger feeders) are used in various industries, and their design can be adapted to the specifics of each industry, if necessary. The screw feeders we manufacture are part of the pellet production lineswe design and build, and ensure stable, even feeding of the raw material to the next production stage.

Bucket conveyors (elevators) are designed for vertical transport of bulk materials such as pellets, sawdust, wood dust, wood chips etc. They are manufactured in various heights with capacities from 22 m3/h to 238 m3/h. Bucket elevators consist of easy to mount modules, made of steel with Magnelis® coating. Belt and buckets: Standard bucket conveyor belts can be used at ambient temperature from -30°C to +50°C. Belts are made of antistatic materials in accordance with ISO284 and DIN22104. Buckets have a very efficient and universal shape that can be used for transporting various materials.

Skorpion 500 EBis a stationary drum chipper designed for chipping flat edgings, round timber, various types of furniture and sawmill waste of a width to 500 mm. The drive section of Skorpion 500 EB chipper is a45 or 55 kW slow-running electric motor. In contrast to high-speed motors, this motor is features more stable operation and higher torque. A slow-speed motor with the same power achieves greater energy transmission, and by increasing the diameter of the pulley on this motor, the service life of the V-belts is extended. The cutting system of the chipperincludes a drum with 2, 3 or optionally 4 cutting knives and 1 counter-knife. Screen used in the construction of this chipper ensures high regularity in size of the product. The required size of chips can be obtained by adequate configuration of suitable number of knives on the drum and the diameter of holes in the screen. The control system of the chipper consists of a control cabinet with functions of switching on, work control

Brand Services represents German Airpower Europe company in Poland. Geraman Airpower Europe company supplies on Polish market different types of valves: different diameters, pressures, materials etc. Scope of valves: Ball valves Butterfly valves Gate valves Globe valves Check valves Pneumatic actuators Electric actuators Positioners Solenoid valves Pneumatic pressure booster