Sewers - Import export

Thickening of sewer station sludge Thickening of sludge from urban or industrial effluent treatment plants The sludge suspension is introduced into the centre of the circular thickener. The thickened sludge is discharged at the centre through the bottom. The sludge suspension is introduced into the centre of the circular thickener. This thickening solution is economical and requires little maintenance. Thickeners are usually made of concrete and can also be made of vitrified steel.

Short description: The solid nozzle for everyday use The sewer nozzle is best suitable for a heavy everyday operation. With its 10 to 12 nozzle inserts and two different jet angles it is primarily used for the all-round cleaning of pipes up to 800 mm in diameter. The sewer nozzle has patented fluid mechanics (patent no.: DE 19516780) and is made of highly wear-resistant special steel. This universal nozzle of heavy construction is characterized by high efficiency and absolute reliability. It is an efficient and low-cost alternative to the conventional standard products.

Short description: Top quality nozzle for everyday use The torpedo nozzle is the ideal tool in all cases where high demands are placed on cleaning and pulling properties. Due to the patented fluid mechanics (patent no.: DE 19533654) and the highly wear-resistant material used it sets new standards on cost reduction and increase in efficiency. The torpedo nozzle that belongs to the most efficient sewer cleaning tools was designed for cleaning lines up to 400 mm in diameter. Two different jet angles contribute to an effective transport of dirt and silt. The torpedo nozzle can cope with difficult tasks in round as well as in egg-shaped pipes.

Short description: All-round cleaning The royal nozzle is one of the most efficient tools for extremely dirty sewers. It adds a new dimension to cost reduction and increase in efficiency. The royal nozzle is specially designed for the all-round cleaning of sewers from 300 mm in diameter. Due to the patented fluid mechanics (patent no.: DE 19533654) its efficiency is unequalled. Two different jet angles ensure optimum cleaning performance in lines up to 1200 mm in diameter.

Short description: Sewer cleaning and inspection carried out simultaneously Wireless camera system consisiting of a TV-camera and a sewer cleaning nozzle. Sewer cleaning and TV-inspection are carried out simultaneously. The information gained by the optic control are primarily used for the optimization of the cleaning performance. At the same time an overview of the canal´s current condition is supplied by every cleansing interval. Due to the on-bord-energy-supply, the system can work without a time limit.

Short description: The protection set This set offers you a high protection for sewer cleaning hoses. It prevents the sewer cleaning hose from abrasion during the insertion into the sewer tunnel. The set consists of one length of the polyethylene disposal hose with black synthetic cuffs on both sides, a 5m-length betalone line, fixed with shrinkdown plastic tubing out of polyolefine.

Short description: Outstanding abrasion resistance GrüloKan 250 Premium offers you much more than all common rubber sewer cleaning hoses. The especially developed composite bi-layers structure of the cover enables a very high abrasion resistance according to EN ISO 6945 (50 N and 2000 cycles max. 1g). This guarantees you a long lifetime at equal flexibility in comparison to our classic GrüloKan 250. Therefore our GrüloKan 250 Premium can be used in any situation, where all others fail. All hoses are assembled with BSP female/male and ferrules. Delivery takes place with test certificate on each assembled hose.

Short description: With polyamide inliner GrüloKan 250 Inliner offers you - besides all the advantages of a common rubber sewer cleaning hose - an extremely smooth polyamide inliner, which guarantees an obviously lower pressure drop. This minimisation of the pressure drop leads to a reduction of the engine speed which means considerable savings in fuel costs. This offers an efficiency benefit you should not miss! GrüloKan 250 Inliner is recommended especially for water conditioning and water recycling vehicles. All hoses are assembled with BSP female/male and ferrules. Delivery takes place with test certificate on each assembled hose.

Short description: For your own safety GrüloKan 250 Protect offers you all the benefits of our classical rubber sewer cleaning hose GrüloKan 250. Furthermore the yellow protection layer underneath the cover makes it easier for you to handle a high pressure hose in acccordance with the requirements of working safety. As soon as the cover gets thinner - in consequence of the rough operating conditions - the yellow protection layer becomes visible and warns you that its time to change the hose. So you and your staff members are always on the safe side. All hoses are assembled with BSP female/male and ferrules. Delivery takes place with test certificate on each assembled hose.

Short description: Rubber sewer cleaning hose GrüloKan 250 offers you all benefits of a professional rubber sewer cleaning hose. The specially developed rubbe compound guarantees a long operating life, high abrasion resistance and an extreme flexibilty. GrüloKan 250 is characterized by its easy handling, light weight and excellent pressure resistance. In addition GrüloKan 250 has a very small bending radius. The hose cover is resistant to abrasion and cut exposure, aging and water resistant. All hoses are assembled with BSP female/male and ferrules. Delivery takes place with test certificate on each assembled hose.

Short description: PU sewer jetting hose, 250 bar GrüloJet 250 is a thermoplastic sewer cleaning hose that has been developed especially for the equipment of professional sewer cleaning vehicles. The pressure carrier, consisting of double-braided highly tearproof aramid- and synthetic fibres, guarantees long endurance and therefore decreases your expenses. The GrüloJet 250 is floatable and extremely abrasion- and cut resistant. Furthermore it stands out due to its excellent flexibility, which simplifies its handling and your daily work. Being one third lighter than common rubber sewer cleaning hoses, it enables you to increase your vehicle payload. All hoses are assembled with BSP female/male and ferrules. Delivery takes place with test certificate on each assembled hose.

Short description: PU sewer cleaning hose, 200 bar New in our product range is the thermoplastic sewer cleaning hose GrüloJet 200 with its pressure carrier, consisting of double-braided highly tearproof synthetic fibres and an extremely abrasion- and cut resistant polyurethane cover. With its working pressure of 200 bar the GrüloJet 200 is eminently suitable for use on sewer cleaning vehicles. Due to its extremely smooth thermoplastic lining the GrüloJet 200 shows an inferior pressure drop than customary rubber sewer cleaning hoses. Furthermore the lower weight gives you the possibility to increase your vehicle payload. All hoses are assembled with BSP female/male and ferrules. Delivery takes place with test certificate on each assembled hose.

Short description: Designed for smaller lines, without front jet In the case of the traction nozzle the patented fluid mechanics (patent no.: DE 19516780) and two different jet angles ensure a very high pulling efficiency, which leads to an efficient dirt transpoprt. This small maneuverable nozzle is ideal for cleaning smaller lines where good pulling properties are required. The traction nozzle is also available with front jet. It is successfully used in difficult pipes (set-off joints, bends etc.).

Short description: Effective removal of deposits and encrustations of all kinds The SUPER Plus 150 chain cutter with basic assembly is used in pipes from 150 mm to 400 mm in diameter. Using auxiliary equipment, it can be extended to pipes up to 800 mm in diameter. The SUPER Plus 150 chain cutter is equipped with two chain inserts which are adjustable to the particular size of the pipe. With 2 year warranty according to KEG´s Terms of Guarantee.

Short description: For pipes and sewers from 50 to 100 mm The DN 50 hummingbird cutter is used in pipes and sewers from 50 mm to 100 mm in diameter. It is equipped with two chain inserts which are adjustable to the particular diameter of the pipe. Without HP swivel joint the hummingbird cutter can be used in pipes from 50 mm in diameter with elbows up to 90º. New: with stainless steel penetrator. With 2 year warranty according to KEG´s Terms of Guarantee.

Short description: For pipes and sewers from 75 to 250 mm The DN 75 mini chain cutter is used in pipes and sewers from 75 mm to 200 mm in diameter. It is equipped with two chain inserts which are adjustable to the particular diameter of the pipe. Without HP swivel joint the mini chain cutter can be used in pipes from 100 mm in diameter with elbows up to 90º. New: with stainless steel penetrator. With 2 year warranty according to KEG´s Terms of Guarantee.

Short description: The ideal tool for all-round cleaning smaller lines The cleaning nozzle is used for all-round cleaning operations in smaller lines up to 400 mm in diameter. This light nozzle has patented fluid mechanics (patent no.: DE 19516780) and two different jet angles. With its eight nozzle inserts it slides in the pipe. The cleaning nozzle goes around bends and is successfully used in difficult pipes.

The wastewater in the sewers is an ideal source of energy when combined with heat pumps and cooling machines, for heating and cooling of buildings. Per our experience, the minimal requirements for such a plant include: a wastewater flow of approx.. 10 l/s a wastewater temperature level of about 10°C a power requirement from 100kW (for heating and cooling from ca. 50kW). During the course of conveying wastewater to the sewage treatment plant, there are many possibilities for exploiting thermal energy. Wastewater can also be used many times over consecutively as energy source. Despite new inflows, or the confluence into larger canals, but also through heat influx from cooling systems, the change in temperature of the wastewater is mostly marginal. Innovative cities have ready energy guidelines (energy plans), based on which you can orient yourself to find out whether there is a suitable wastewater canal in your near vicinity (maximally approx. at a distance of 200 m).

The wastewater in the sewers is an ideal source of energy when combined with heat pumps and cooling machines, for heating and cooling of buildings. Per our experience, the minimal requirements for such a plant include: a wastewater flow of approx.. 10 l/s a wastewater temperature level of about 10°C a power requirement from 100kW (for heating and cooling from ca. 50kW). During the course of conveying wastewater to the sewage treatment plant, there are many possibilities for exploiting thermal energy. Wastewater can also be used many times over consecutively as energy source. Despite new inflows, or the confluence into larger canals, but also through heat influx from cooling systems, the change in temperature of the wastewater is mostly marginal. Innovative cities have ready energy guidelines (energy plans), based on which you can orient yourself to find out whether there is a suitable wastewater canal in your near vicinity (maximally approx. at a distance of 200 m).

Category Hydraulic hoses and fittings / Ferrules for hydraulic hoses / Ferrules for sewer cleaning hose Ecology Product number supplier 423402000

Category Hydraulic hoses and fittings / Ferrules for hydraulic hoses / Ferrules for sewer cleaning hose Ecology Product number supplier 423402500

LINA FREESTANDING BATHTUBS

OTTOVIA FREESTANDING BATHTUBS

Stainless Panel Shower

Sliding Shower Sets

BIDET SPRAYER

Stainless Panel Shower

Sewer inspection chambers of the "Zagožen" type are universal chambers, intended for a broad circle of users with the most varied of requirements. The structural solution of the chambers guarantees, along with ecological acceptability, the following: - long life (the manufacturer guarantees a 50 year life expectancy of material), - watertightness, - waste water resistance, - age resistance, - wear resistance, - simple and quick adaptation of installation height, - simple and quick construction of an additional attachment, - of various combinations of entry and exist attachments, - savings when making the reinforced concrete plate (cone), - suitable for all types of sewers, - suitable for all types of connection pipes, - height of through suits max. cross-section of attachment pipe or is equal to the - - diameter of attachment pipe, - saves time due to quick and simple installation, - simple transport, - easy manipulation (manual handling).