Systems for the pharmaceutical industry - Import export

The IST AG LV5 sensor is a flow-through biosensor and offers the possibility for multi-parametric measurements, since up to 4 analytes can be measured simultaneously (glucose, lactate, glutamine, glutamate). The sensor features a very small flow cell (1 µL) and therefore requires minimal sample volumes when used as an analyzer. Further advantages of the LV5 biosensor include: — Excellent long-term stability over a month in continuous measurement mode (lifetime varies depending on various factors, including the analyte concentration and buffer system (medium) amongst others) — Long shelf life (under appropriate environmental conditions) — Gamma and beta sterilization compatible — Suitable for continuous and analyzer measurement modes — Fast response time (depends on the buffer system (medium)) — Reference, counter and blank electrodes on-chip — Integrated flow cell (various volumes) Suitable for sampling systems in laboratories or food and pharmaceutical industries.

With Novartos Multi double sampling, a double multi-point sample can be taken from multiple predefined sample zones. Depending on the lenght, four, seven or nine sample chambers are each fitted with two sample inserts for the double sampling.

Rigid stand for wall-mounting for tank volumes from 100 l. Mixer powers from 0.37 kW to 7.5 kW and support loads up to 100 kg can be realized. Under these conditions, the stand can be equipped with all fast running or gear-reduced mixers and their matching agitator elements. The lift is done by a geared hand-wheel or electric with a lift drive and chain drive. The mixer is positioned on a cantilever beam which is fixed to a support slide that is moved on the stand column. The electric or pneumatic supply is guided through a laterally mounted energy chain. The stand WRW is available in two standard sizes, thus enabling the processing of various tank sizes. The standard sizes are particularly designed for the processing of exchangeable vessels such as drums and IBCs.

Mobile stand with H-foot for tank volumes from 100 l. The mobility of the tripod is ensured by using castors and fixed castors. The tripod can be moved due to The lift is done by a geared hand-wheel or electric with a lift drive and chain drive. Mixer powers from 0.37 kW to 7.5 kW and support loads up to 100 kg can be realized (with ex-protection only realizable to a limited extend). Under these conditions, the stand can be equipped with all fast running or gear-reduced mixers and their matching mixing elements. The mixer is positioned on a cantilever beam which is fixed to a support slide that is moved on the stand column. The FRW is equipped with fixed and steerable wheels for mobility. The electric or pneumatic supply is guided through a laterally mounted energy chain. The mobile stand mixer FRW is available in two standard sizes that are particularly designed for the processing of exchangeable vessels such as drums and IBCs. Various tank sizes upon request.

Rigid stand with H-foot for tanks that range in volume from 100 l. Under these conditions, the stand can be equipped with all fast running or gear-reduced mixers and their matching mixing elements. Mixer powers from 0.37 kW to 7.5 kW and support loads up to 100 kg – by means of a reinforced stand loads up to 300 kg – can be realized. The agitator is positioned on a telescope sleeve that is moved via the spring-suspended lid connected to the stand. The lift is done by a geared hand-wheel or electric with a lift drive and chain drive. The mixer is positioned on a cantilever beam which is fixed to a support slide that is moved on the stand column. The electric or pneumatic supply is guided through a laterally mounted energy chain. The floor stand mixer SRW is available in two standard sizes that are particularly designed for the processing of exchangeable vessels such as drums and IBCs. Various tank sizes upon request.

The CRP-M tote tank mixers are featured with a pneumatic drive and were designed for the application in stainless steel tanks with filling openings of at least 400 mm and mixing volumes of 400 l to 1,500 l. The fast running pneumatic agitators are equipped with bearing and coupling housings. By means of the maintenance unit, pressurized air is enriched with oil for the vane drive. The mixer is mounted on the container’s manway lid, which is clamped with butterfly screws or a clamp ring. The manway lid is supplied by the container manufacturer or by the customer. The impellers are designed to fit through the filling opening of at least 400 mm when being inserted. All CRP-M series can be supplied as follows: Lid Muffler Explosion-protection design

The tote tank mixers CR-M are designed for operation on stainless steel containers with filling openings of DN 400 mm and mixing volumes from 400 l up to 1,500 l. Depending on the viscosity of the mixing material, CR-Ms with fast running or gear reduced drives are available. The agitator shafts are connected to the drive shafts with sleeve couplings or borne within the gear’s hollow shaft (worm gear). The agitator shafts are balanced for concentric run after assembly. The mixer is mounted on the container’s manway lid, which is clamped with butterfly screws or a clamp ring. The manway lid is supplied by the container manufacturer or by the customer. The impellers are designed to fit through the filling opening DN 400 when being inserted. The electric container mixers are delivered with on-/off-switches with low-voltage breaker. The electric container mixers can also be supplied with frequency converter drives. All CR-M series mixers can be supplied as follows:

The tote tank mixers CRP-E are equipped with a pneumatic drive. It has been especially designed for plastic IBCs with filling openings of at least 150 mm and volumes from 600 l up to 1,200 l. The fast running pneumatic agitators are equipped with bearing and coupling housings. By means of the maintenance unit, pressurized air is enriched with oil for the vane drive. The mixer is mounted on a container traverse bridge, which is included in the scope of supply and clamped with a rapid fixing system to the cage frame of the IBC. The plastic bulk of the container is therefore not harmed by any static or dynamic loads by the agitator. Folding propellers that fit through the filling opening DN 150 mm are used for geared agitators. The agitator shafts are connected to the drive shafts with sleeve couplings or borne within the gear’s hollow shaft (worm gears). The agitator shafts are balanced for concentric run after assembly. Explosion-proof mixers are also feasible.

The tote tank mixers CR-E are designed for operation on plastic containers with filling openings of 150 mm and volumes from 600 l up to 1,200 l. The customer may choose between various viscosity-related basic versions of fast-running and slow-running mixers with electric drives. The agitator shafts are connected to the drive shafts with sleeve couplings or borne within the gear’s hollow shaft (worm gears). The agitator shafts are balanced for concentric run after assembly. The mixer is mounted on a container traverse bridge, which is included in the scope of supply and clamped with a rapid fixing system to the cage frame of the IBC. The plastic bulk of the container is therefore not harmed by any static or dynamic loads by the agitator. The fixing of the traverse bridge is adjustable for various container models. The impellers are designed to fit through the filling opening 150 mm when being inserted. The electric container mixers are delivered with on-/off-switches with low-voltage breaker.

The FR series is a fast running electric drum mixer that can directly be mounted on 200 l steel drums with a 2“ bung hole. The mounting on the drum is done with a 2” threaded adapter with which the agitator is screwed into the bung hole. The agitator shaft is connected to the drive shaft by means of a sleeve coupling. Folding propellers are used as mixing elements, which can be inserted into the drum through the 2” bung hole when being folded. The FR series mobile mixer is delivered as a turn-key solution with an on-/off-switch with low voltage breaker and connection cable. Upon request, the FR series mixer can also be supplied with an integrated frequency inverter. Additionally we can provide you with a vessel clamp applicable for open lid drums.

IF Series floor scales are flat-bed scales that are available in various sizes, designs, weighing capacities and resolutions. They feature strain-gauge load cells that provide especially precise resolution. All flat-bed scales can be configured as high resolution instruments (15,000d or 30,000d), or for use in legal metrology (1 x 3,000d/e or 2 x 3,000d/e). and can be easily connected to the Minebea Intec Combics indicators, QCT01 or isi terminals. IF Floor Scales Painted - 1 x 3,000e or 2 x 3,000e (verifiable as legal for trade in accuracy class III) or 15,000d or 30,000d (not for use in legal metrology) - Construction featuring metal plates with pressed edges (no welded seams) - Exceptionally low-profile design (starting at 25mm) - IP65 protection rating - Including drive-on ramp - Rugged, industrial-grade construction - Optionally with connection endplate

- Compact design - Made up to the ISO, FDA and EU, GMP and cGMP international standards - Can handle multiple cups shapes and sizes - SCADA system included - Touch screen included - Capacity is adjustable up to your needs - Can be used For all liquid substance including alcohol, sanitizers, hand gel, and more