Hydraulic equipment - Import export

The hydronic separator is a device that makes the primary and secondary circuits connected to it independently and can be used on hot or chilled water systems. The separator is supplied with an air-vent and check valve assembly to permit the automatic discharge of the air in the circuits, and a drain valve for removing any İmpurities deposited in the bottom of the unit. Three functions in a single component Just four connections instead of eight Optimum hydraulic balance between primary and secondary pumps Viratube guarantees minimal fluid mixing and thus the best temperature differential Real, active deaeration and dirt separation Even the tiniest air bubbles and dirt particles are separated and removed Constant low-pressure drop Compact design and limited built-in height, thanks to the Viratube Exceptional guarantee

Optima Tanks offer side and rear-mounted hydraulic oil tanks for Tippers and mobile applications

Optima Plus series Hydraulic Oil Tanks developed especially for Palfinger, Hiab, cranes. Equivalent: KTK001-CB, KTK021-CB, KTK002-CB, KTK003-CB, KTK004-CB, KTK005-CB, KTK001-BA, KTK021-BA, KTK002-BA, KTK003-BA, KTK004-BA, KTK005-BA, KTK007-BA, UT032, KTK017-BA, T20, 3391558, 3397025, 3391566, 3391736, 3395073, 3391574, 3391744, 3395081, 3391582, 3391639, 3395090, 3391591, 3391647, 3395103, 3391604, 3391655, 3395111, 3391612, 3391663, 3395120, 3391621, 3391671, 3395138, 3391710, 3391728,

-Hydraulic Mini power packs -Hydraulic pumps, -Hydraulic Motors, Orbit Motors -Hydraulic power units and various hydraulic systems -Solenoid, Pilot, Manuel operated hydraulic directional control valves -Hand Valves -Relief, pressure, reducing, speed control valves, check valves, throttle valves -Modular and plate designed valves -Control blocks and hydraulic switch -Hydraulic Cylinders -Oil Coolers #hydraulicsystems #hydrauliccylinders #minipowerpacks #GearPumps #HydraulicMotors #HandValves

RODUCTS CODE : ATHA- 800-16 TANK CAPACITY : 800 Lt. PUMPS SPECIFICATION MODEL: MTS - 496 D PISTON : 4 FLOW : 96 Lt. SPEED : 540 PRESSURE : 50 Bar CONTROL UNITS : MTS - 50 R 5 BOOM SPECIFICATION BOOM : 16 Mt. BOOM ADJUST. : Manual HEIGHT ADJUST.: Hydraulic NOZZLE : 33 HP : 40

Atlas Copco 3115-2118-00 Guide Compatible models: -1638 -1638 C -1838 ME -1838 C

Is a high performance hydraulic system oil which is suitable to use in wide temperature range. It can be used in all types of construction equipment and hydraulic system even under high pressure due to its special additive package in its content. It provides superior protection in hydraulic systems under extreme operating conditions.

Is a high performance hydraulic system oil which is suitable to use inwide temperature range. It can be used in all types of construction equipment and hydraulic system even under high pressure due to its special additive package in its content. It provides superior protection in hydraulic systems under extreme operating conditions.

Dura T Series, is a high performance hydraulic system oil which is suitable to use in wide temperature range. It can be used in all types of construction equipment and hydraulic system even under high pressure due to its special additive package in its content. It provides superior protection in hydraulic systems under extreme operating conditions.

Dura T Series, is a high performance hydraulic system oil which is suitable to use in wide temperature range. It can be used in all types of construction equipment and hydraulic system even under high pressure due to its special additive package in its content. It provides superior protection in hydraulic systems under extreme operating conditions.

Dura T Series, is a high performance hydraulic system oil which is suitable to use in wide temperature range. It can be used in all types of construction equipment and hydraulic system even under high pressure due to its special additive package in its content. It provides superior protection in hydraulic systems under extreme operating conditions.

Dura T Series, is a high performance hydraulic system oil which is suitable to use in wide temperature range. It can be used in all types of construction equipment and hydraulic system even under high pressure due to its special additive package in its content. It provides superior protection in hydraulic systems under extreme operating conditions.

Dura T Series, is a high performance hydraulic system oil which is suitable to use in wide temperature range. It can be used in all types of construction equipment and hydraulic system even under high pressure due to its special additive package in its content. It provides superior protection in hydraulic systems under extreme operating conditions.

Deck equipments, Hydraulic equipments, Electrical parts, Spare Parts, Fire and safety equipments,

It is hydraulic system oil that is formulated with highly well refined para nic base oils and AW corrosion preventive additives. It is intended to be used with the purpose of load carrying in industrial load transmission systems and in hydraulic equipment of heavy earth movers.

It is hydraulic system oil that is formulated with highly well refined paraffinic base oils and AW corrosion preventive additives. It is intended to be used with the purpose of load carrying in industrial load transmission systems and in hydraulic equipment of heavy earth movers.

They are high performance, high viscosity index hydraulic oils specially designed with advanced viscosity index developer to meet the requirements of modern hydraulic systems operating at variable ambient temperatures. They provide high performance by providing excellent lubrication in piston or gear pumps, presses and other hydraulic system equipment which operate under di cult conditions with the help of additives that provide anti-wear and thermal stability with the formulation which enables stability in a wide temperature range.

Fire Resistant Hydraulic Fluid 620 has been meticulously engineered to provide the utmost safety when employed in hydraulic systems situated in proximity to open flames or high-temperature environments. Hazards loom whenever hydraulic equipment finds itself in close proximity to heat sources, molten metal, or open flames. Even the tiniest fissure in a hydraulic line or fitting can result in a combustible spray of oil being propelled toward the heat source. This, in turn, can lead to severe injuries, property damage, the destruction of machinery and facilities, as well as production delays.

Fire Resistant Hydraulic Fluid 620 represents a cutting-edge solution meticulously engineered to prioritize safety when operating hydraulic systems in proximity to open flames or high-temperature environments. The presence of heat, molten metal, or flames in close proximity to hydraulic equipment poses inherent risks. Even the tiniest fissure in a hydraulic line or fitting has the potential to disperse a combustible mist of oil towards the heat source. Such a scenario can lead to devastating consequences, including severe injuries, property damage, the destruction of machinery and infrastructure, and significant production delays, all resulting from ensuing fires. High Degree of Fire Resistance Non-Explosive Corrosion Inhibited Good Lubricity High Viscosity Index – ISO 46 Viscosity Stable in Service Long Pump Life Long Term Economy Synthetic Rubber Packings not Affected HFC Classification

Brake Fluid Dot 5 represents a top-notch silicone-based brake fluid intended for use in all hydraulic brake and clutch systems equipped with drum or disc brakes, excluding those utilizing LHM fluids. In contrast to DOT 3 and DOT 4 brake fluids, DOT 5 stands out for being non-hygroscopic, offering superior thermal stability, and featuring higher dry and wet boiling points. This specially formulated brake fluid contains rust and chloride corrosion inhibitors, ensuring excellent protection. With a dry boiling point exceeding 260°C and a wet boiling point surpassing 180°C, it meets the highest performance standards. In full compliance with FMVSS 116 DOT 5 and SAE J 1705 standards. Goes above and beyond all standard DOT 5 specifications. Boasts an elevated boiling point, effectively eradicating brake fade for exceptional performance. Remains impervious to atmospheric water absorption, ensuring a prolonged service life without reducing the boiling point.

Mechanical parts that we supply continously for our international customers; -Gear boxes and repair kits -Pumps and repair kits -Various spindles for different kinds of CNC milling machines -Pneumatic valves, sensors and control equipments -Hydraulic valves, sensors and control equipments

Aluminium heat exchanger Heat output from 50 kW to 3250 kW High corrosion resistance Efficient heat transfer Compact size for easy installation and maintenance Self cleaning with special pin design Low pneumatic resistance High modulation range possible Low hydraulic resistance. Excellent thermal conductivity Equipped with fiber coated, premix round – burner

For video : https://bit.ly/3rLexUi Automatic Casting Trolleys are especially preferred in iron and steel industry foundries. It is one of the transfer systems that provide high safety and efficiency during the casting of serial molds. It can regulate the line speed and work in accordance with the line speed. They are vehicles that can overturn the crucible (approximately 3500 kg) with a capacity of carrying 1.6 tons of molten steel at 110ᵒ degrees. They are specially designed according to the customer's line specifications. Tıkır Makina has been producing vertical and horizontal transfer systems for the industry since its establishment. It has the ability to produce conveyors, elevators, autonomous driverless forklifts and special design projects according to your needs.

FITTINGS AND NIPPLES ADJUSTABLE STUD ELBOWS BANJO BOLTS BANJO FITTINGS BRAKER HOSE FITTINGS BSP FORGED STEEL FITTINGS FEMALE SCREWED MUFF FLANGE HOSE FITTINGS HORTUM EK RAKORLAR HOSE FITTINGS LOCK NUTS MALEHOSE FITTINGS METRIC FORGED STEEL FITTINGS NIPPLES NUTS AND RINGS ORFS FORGED STEEL FITTINGS PLUGS PRESSURE GAUGE CONNECTORS REDUCERS AND EXPANDERS STEEL SOCKETS SWIVEL REDUCERS TEST HOSE FITTINGS THE OTHER FORGED STEEL FITTINGS UNF FORGED STEEL FITTINGS WELDING NIPPLES