Sealing - Import export

Punching control pliers

Sealing pliers

Sealing pliers

Seals to close without pliers to close without plier nor wire. - Seals "all in one": - Plastic Pull-Tight Seals - Plastic Pull-Up adjustable seals

Seals to close without pliers. - To use with a special wire - Seals with rotating closure

Spiral sealing wire

Round lead seals to close with sealing pliers to use with a special wire.

Elastomer NBR. Brace ring and tension spring steel. Rotary shaft lip seals are readytoinstall seals for sealing rotating shafts. They are made from an elastomer outer sleeve and an internal bracing shim. The tension spring ensures increased pressure of the lip against the shaft and supports static sealing. Form A DIN 3760 (ISO 6194/1) version, smooth OD. Form AS DIN 3760 (ISO 6194/0) version, smooth OD with extra dust lip to protect from external dirt. The material NBR has a high wear resistance and is resistant to motor fuels, oil, hydraulic oil and lubricating grease. Operating limits Circumferential speed (m/s) ≤12 Pressure (MPa/bar) ≤0.05/0.5 (rotary shaft lip seals are generally meant for unpressurised operation).

Orings are universal sealing elements used to seal against liquid or gaseous median. They are suitable for static and minor dynamic applications. Orings can be used for radial and axial sealing. The sealing occurs during installation by the radial or axial compression of the crosssection. During operation, the median pressure increases the deformation of the Oring and so increases the sealing effectiveness. For best sealing effectiveness, the Oring should have the largest possible crosssection. During installation the correct groove size, compaction, elongation/compression should be ensured. By static use the compaction should be 15 30% of the crosssection. By dynamic use it should be 10 18% (hydraulic), 4 12% (pneumatic). With regard to the ID, when installed the Oring should be stretched max 6% compressed max 3%

We seal your housings, control cabinets or lighting units, apply adhesives or cast electronic components. In addition to the proven, high-performance 2-component PUR seals (FIPFG), we cover other important areas of application for our customers by applying homogeneous 1-component seals. For example, if your application requires higher temperature and/or chemical resistance or may be less compressible than a foamed seal. Our one-component, elastic solutions are also used for electrically conductive seals. We dose silicones, polyurethanes or MS polymers in liquid, unreacted form directly onto your component. True to contour on the smallest geometries, extremely adhesive and durable. Perfect sealing – sealing, gluing, casting directly on the component. Absolutely true to the contour and directly onto your component. We enable our customers to do this in series thanks to state-of-the-art dosing systems.

We seal your housings, control cabinets or lighting units, apply adhesives or cast electronic components. In addition to the proven, high-performance 2-component PUR seals (FIPFG), we cover other important areas of application for our customers by applying homogeneous 1-component seals. For example, if your application requires higher temperature and/or chemical resistance or may be less compressible than a foamed seal. Our one-component, elastic solutions are also used for electrically conductive seals. We dose silicones, polyurethanes or MS polymers in liquid, unreacted form directly onto your component. True to contour on the smallest geometries, extremely adhesive and durable. Perfect sealing – sealing, gluing, casting directly on the component. Absolutely true to the contour and directly onto your component. We enable our customers to do this in series thanks to state-of-the-art dosing systems.

Engine seals for wheel loader FERRUM DM with engine XIN498. Will be delivered like shown.

Blow guns, bleeder valves, spray guns, professional cleaning guns and special compressed air and liquid guns also belong to the RIEGLER product spectrum, as well as hand-held tyre gauges, hose clamps, sealing material and various supply units. You are always on the safe side with RIEGLER industrial adhesives, sprays and sticks.

Sealing sets for oil motors Material: NBR Category Hydraulic systems, valves and components / Hydraulic motors / Accessories / Sealing kit Product number supplier 46050019

Sealing sets for oil motors Material: NBR Category Hydraulic systems, valves and components / Hydraulic motors / Accessories / Sealing kit Product number supplier 46050019

Fiber sealing rings Flat sealing rings form A according to DIN 7603 material: VF Vulcan-Fiber working temperature: according to DIN max. +100° C Category Sealings / Vulkanized fiber sealings / Sealing rings Product number supplier 101001

Aluminium sealing rings Flat sealing rings form A according to DIN 7603 material: AL 99,5 semi - rigid = F 20, this corresponds to the hardness of 32 - 45 HB, demanded by the DIN working ... Category Sealings / Aluminum sealings / Sealing rings Product number supplier 100402

Aluminium sealing rings Flat sealing rings form A according to DIN 7603 material: AL 99,5 semi - rigid = F 20, this corresponds to the hardness of 32 - 45 HB, demanded by the DIN working ... Category Sealings / Aluminum sealings / Sealing rings Product number supplier 100402

seaing profile EN45545

Cellular rubber made by KOPP is the ideal material for sealing, insulating, insulating, dampening and as rattle protection. Cellular rubber is a porous, closed-cell rubber quality that is available in various strengths and densities. It is manufactured using the so-called expansion process - based on natural and/or synthetic rubbers, such as EPDM and other synthetic elastomers. Cellular rubber is airtight and waterproof and therefore (unlike foam rubber) does not require an outer skin to be used as a seal. From our KOEPPcell® range you can get the following cellular rubber or elastomer types in our usual high quality at extremely interesting prices: • Natural rubber (NR-L, NR-S) • EPDM (EPDM-L*, EPDM-S*, EPDM- SUW*, EPDM-W*) * all also peroxidically cross-linked • Chloroprene rubber (CR-L, CR-S) • EPDM-PE blend • EPDM-CR blend (EPDM-CR-L, EPDM-CR-S ) • mixed-cell (semi-closed) EPDM (EPDM-SC) Technical properties Can withstand a wide range of requirements

Cellular rubber made by KOPP is the ideal material for sealing, insulating, insulating, dampening and as rattle protection. Cellular rubber is a porous, closed-cell rubber quality that is available in various strengths and densities. It is manufactured using the so-called expansion process - based on natural and/or synthetic rubbers, such as EPDM and other synthetic elastomers. Cellular rubber is airtight and waterproof and therefore (unlike foam rubber) does not require an outer skin to be used as a seal. From our KOEPPcell® range you can get the following cellular rubber or elastomer types in our usual high quality at extremely interesting prices: • Natural rubber (NR-L, NR-S) • EPDM (EPDM-L*, EPDM-S*, EPDM- SUW*, EPDM-W*) * all also peroxidically cross-linked • Chloroprene rubber (CR-L, CR-S) • EPDM-PE blend • EPDM-CR blend (EPDM-CR-L, EPDM-CR-S ) • mixed-cell (semi-closed) EPDM (EPDM-SC) Technical properties Can withstand a wide range of requirements

ellular rubber made by KOPP is the ideal material for sealing, insulating, insulating, dampening and as rattle protection. Cellular rubber is a porous, closed-cell rubber quality that is available in various strengths and densities. It is manufactured using the so-called expansion process - based on natural and/or synthetic rubbers, such as EPDM and other synthetic elastomers. Cellular rubber is airtight and waterproof and therefore (unlike foam rubber) does not require an outer skin to be used as a seal. From our KOEPPcell® range you can get the following cellular rubber or elastomer types in our usual high quality at extremely interesting prices: • Natural rubber (NR-L, NR-S) • EPDM (EPDM-L*, EPDM-S*, EPDM- SUW*, EPDM-W*) * all also peroxidically cross-linked • Chloroprene rubber (CR-L, CR-S) • EPDM-PE blend • EPDM-CR blend (EPDM-CR-L, EPDM-CR-S ) • mixed-cell (semi-closed) EPDM (EPDM-SC) Technical properties Can withstand a wide range of requirements

Cellular rubber made by KOPP is the ideal material for sealing, insulating, insulating, dampening and as rattle protection. Cellular rubber is a porous, closed-cell rubber quality that is available in various strengths and densities. It is manufactured using the so-called expansion process - based on natural and/or synthetic rubbers, such as EPDM and other synthetic elastomers. Cellular rubber is airtight and waterproof and therefore (unlike foam rubber) does not require an outer skin to be used as a seal. From our KOEPPcell® range you can get the following cellular rubber or elastomer types in our usual high quality at extremely interesting prices: • Natural rubber (NR-L, NR-S) • EPDM (EPDM-L*, EPDM-S*, EPDM- SUW*, EPDM-W*) * all also peroxidically cross-linked • Chloroprene rubber (CR-L, CR-S) • EPDM-PE blend • EPDM-CR blend (EPDM-CR-L, EPDM-CR-S ) • mixed-cell (semi-closed) EPDM (EPDM-SC) Technical properties Can withstand a wide range of requirements

Cellular rubber made by KOPP is the ideal material for sealing, insulating, insulating, dampening and as rattle protection. Cellular rubber is a porous, closed-cell rubber quality that is available in various strengths and densities. It is manufactured using the so-called expansion process - based on natural and/or synthetic rubbers, such as EPDM and other synthetic elastomers. Cellular rubber is airtight and waterproof and therefore (unlike foam rubber) does not require an outer skin to be used as a seal. From our KOEPPcell® range you can get the following cellular rubber or elastomer types in our usual high quality at extremely interesting prices: • Natural rubber (NR-L, NR-S) • EPDM (EPDM-L*, EPDM-S*, EPDM- SUW*, EPDM-W*) * all also peroxidically cross-linked • Chloroprene rubber (CR-L, CR-S) • EPDM-PE blend • EPDM-CR blend (EPDM-CR-L, EPDM-CR-S ) • mixed-cell (semi-closed) EPDM (EPDM-SC) Technical properties Can withstand a wide range of requirements As a manufacturer and dealer

Cellular rubber made by KOPP is the ideal material for sealing, insulating, insulating, dampening and as rattle protection. Cellular rubber is a porous, closed-cell rubber quality that is available in various strengths and densities. It is manufactured using the so-called expansion process - based on natural and/or synthetic rubbers, such as EPDM and other synthetic elastomers. Cellular rubber is airtight and waterproof and therefore (unlike foam rubber) does not require an outer skin to be used as a seal. From our KOEPPcell® range you can get the following cellular rubber or elastomer types in our usual high quality at extremely interesting prices: • Natural rubber (NR-L, NR-S) • EPDM (EPDM-L*, EPDM-S*, EPDM- SUW*, EPDM-W*) * all also peroxidically cross-linked • Chloroprene rubber (CR-L, CR-S) • EPDM-PE blend • EPDM-CR blend (EPDM-CR-L, EPDM-CR-S )

Cellular rubber made by KOPP is the ideal material for sealing, insulating, insulating, dampening and as rattle protection. Cellular rubber is a porous, closed-cell rubber quality that is available in various strengths and densities. It is manufactured using the so-called expansion process - based on natural and/or synthetic rubbers, such as EPDM and other synthetic elastomers. Cellular rubber is airtight and waterproof and therefore (unlike foam rubber) does not require an outer skin to be used as a seal. From our KOEPPcell® range you can get the following cellular rubber or elastomer types in our usual high quality at extremely interesting prices: • Natural rubber (NR-L, NR-S) • EPDM (EPDM-L*, EPDM-S*, EPDM- SUW*, EPDM-W*) * all also peroxidically cross-linked • Chloroprene rubber (CR-L, CR-S) • EPDM-PE blend • EPDM-CR blend (EPDM-CR-L, EPDM-CR-S ) • mixed-cell (semi-closed) EPDM (EPDM-SC) Technical properties Can withstand a wide range of requirements As a manufacturer and dealer

In the FIPFG process, a 2-component sealing system in a still liquid, non-reacted form is applied “in-situ” directly and true to the contour to the component using a robot. Highly elastic, dimensionally accurate and cost-effective seals that are perfectly connected to the workpiece: KOPP has been offering this to you for more than 15 years in the form of FIPFG sealing systems. In the FIPFG process (formed-in-place-foam-gasket), a 2-component sealing system in a still liquid, non-reacted form is applied “in-situ” directly and true to the contour to the component using a robot. The possibilities of the technology are as diverse as our customers' requirements for the seals themselves. This makes on-site technical advice essential. Thanks to our experience and technical expertise, we always find the perfect solution with our customers. Through our own toolmaking and construction and application consulting, we can produce quickly, flexibly and cost-effectively.

In the FIPFG process, a 2-component sealing system in a still liquid, non-reacted form is applied “in-situ” directly and true to the contour to the component using a robot. Highly elastic, dimensionally accurate and cost-effective seals that are perfectly connected to the workpiece: KOPP has been offering this to you for more than 15 years in the form of FIPFG sealing systems. In the FIPFG process (formed-in-place-foam-gasket), a 2-component sealing system in a still liquid, non-reacted form is applied “in-situ” directly and true to the contour to the component using a robot. The possibilities of the technology are as diverse as our customers' requirements for the seals themselves. This makes on-site technical advice essential. Thanks to our experience and technical expertise, we always find the perfect solution with our customers. Through our own toolmaking and construction and application consulting, we can produce quickly, flexibly and cost-effectively.