FLAIG MAGNETSYSTEME GMBH & CO.KG

FXE TTO lifting magnet trusses are used to remove large areas from laser or flame cutting tables. Parts from 100x100mm are removed from the table in their entire layer. Depending on the material thickness, whole sheets can also be placed with the FXE-TTO. The design of the system depends on the sheet format to be moved (uncut, LxWxH) and the dimension of the smallest blank.

FX lifting magnets in universal design convince by their wide field of application. The FX achieves good results with large air gaps as well as with thin flat and round materials with a compact design and low dead weight. The device is characterized by great robustness and a very good price/performance ratio. First choice for all users who want to move massive sheets and blocks.

FX-KT small trusses lift workpieces that cannot be picked up with a magnet in the center, such as rings, punching tools and flanges. Two FX magnets, adjustably mounted on a truss made of high-strength aluminum, provide a secure hold. With a few simple steps, the magnets can be removed from the truss and used individually.

FXE-TT telescopic trusses are equipped with electro-hydraulic telescopic arms and are suitable for handling sheets of 3-16m length. The system consists of fixed and movable crossbars, each equipped with two magnetic modules. The length of the truss can be adjusted individually via radio remote control. The magnetic system can be operated on the truss itself or on the radio remote control included in the delivery.

Permanent magnetic chucks type PMNM are high precision plates for clamping small and thin parts for precision grinding and eroding. The low magnetic field height prevents magnetization of the processing tools. The chipboard is activated via a removable hex shifter. Structure: — Neodymium magnet system, steel body — transverse pole pitch 1.4 + 0.5mm — Holding power 100 N/cm2 — Magnetic field height 5mm — Pole plate wearing limit 6mm Recommendation: High-precision chuck for grinding and eroding

FXE-MH electro-permanent lifting magnets are especially suitable for transporting slabs and blocks. The electro-permanent modules type MH are designed to safely lift large loads with a large air gap. Electro-Permanent Lifting Magnets FXE Electro-Permanent Lifting Magnets from Flaig Magnetsysteme have been setting standards for over 20 years Electro-Permanent Lifting Magnets are the best choice if: the load to be moved is too large for permanent magnets the lifting magnet must be operated and controlled ergonomically the geometry of the load does not fit permanent magnets the lifting magnet must be remote controlled and possibly load adjustable the load capacity is too large in relation to the material thickness for permanent magnets

Pole reversal controllers from the FXL-C family reliably control not only our FXL magnetic chucks, but almost all electro-permanent magnet systems on the market. Input voltages of 100-500 VAC / 50-60Hz and matching modulated, pulsed output voltages and pulse powers of up to 24 kVA are unique key data, which are only required under extreme conditions, but provide maximum stability in normal use. FXL-C is available from simple, handy table-top units to control cabinet versions for large-scale applications; stand-alone from manually operated, part-connected with feedback to the machine up to full integration into the machine control for automated applications.

FXE-TP electro-permanent lifting magnets are ideally suited for beams and profiles due to their special design. The pick-up of beams at the profile web is possible without any problems due to the specially shaped pole surface. FXE-TP lifting magnets are also available as a truss solution, specially tailored to your application.

FXL-R round magnetic chucks in square pole technology are especially suitable for use on the lathe and on rotary tables of machining centers. The frame construction of the FXL plate can be equipped with centering elements at the front on the clamping side as well as at the rear. All FXL magnetic chucks can be operated with FXL-C or FXL-CT control units.

FXE-M electro-permanent load lifting magnet modules can be combined with MCF control units to form modular load lifting systems. For example, a single FXE-M module with an MCF 1-channel control unit can be used on the crane of a flame-cutting machine, or 4 FXE-M modules, controlled together or individually by an MCF 4-channel control unit, can operate in a fully automatic sectional steel plant. In use on cranes, manipulators, conveyors and robots, FXE-M modules have proven themselves thousands of times over. FXE-M modules are manufactured using monoblock technology and are extremely stable. As with the other products in the FXE series, a choice can be made between different pole types in order to use the appropriate magnet module depending on the load, dimensions and surface.