Components-%20electronic - Import export

These half-wave and bridge rectifiers are ideal for installation in the junction boxes of medium-power brake motors, brakes and solenoids. Accessories include flying leads and a range of mounting hardware so that installation on DIN rails is also possible. Encapsulated versions for an extended operating temperature range are available as options. In case of additional DC side fast turn-off, the induction voltage generated by inductive loads is limited within the rectifier.

The rectifier with built-in current sensor for fast turn-off is designed for the operation of electromagnetic devices. It ensures fast turn-on and turn-off. The rectifier with bridge circuit comprises a thyristor and timer. During overexcitation, the rectifier delivers bridge rectified output voltage before changing over to half-wave rectification. On the DC side, the output voltage is enabled by the built-in current sensor which measures the AC current of the connected motor. If the motor is stopped, the rectifier turns off on the DC side as soon as the current falls below the turn-off threshold. The turn-off voltage generated by the inductive load is limited. The rectifier is suitable for connection in parallel with AC motors. The current sensor must be wired into the motor current path in such a way that the current flow created when the motor operates in generator mode will not pass through the sensor. This is crucial to avoid delayed or impaired DC side switching.

These overexcitation rectifiers are designed to increase the attractive force and reduce the attraction time of actuating solenoids, to shorten the coupling and disconnection times of clutches and brakes and to decrease the power consumption of clutches, brakes and actuating solenoids. To increase the attractive force, the solenoid is overexcited during the overexcitation time, applying bridge rectified voltage. Then the rectifier changes over to the selected holding voltage which must not exceed the rated voltage of the solenoid.

These compact half-wave and bridge rectifiers are ideal for installation in space restricted junction boxes of brake motors. They can be delivered with flying leads or terminals for connection. Various accessories are available to meet different installation requirements.

ESM for AC-brakes: The module consists of a time-controlled rectifier with integral electronic fast turn-off. During start-up, the ESM delivers bridge-rectified output voltage before changing over to half-wave rectification. The built-in voltage sensor ensures that the DC side output voltage is interrupted electronically when AC input voltage is removed. Thanks to its compact design, the ESM can be installed in very restricted space. ESM for DC-brakes: The module keeps the voltage supplied to the electromagnetic device at a constant level over a wide input voltage and temperature range. Full operating voltage is applied to ensure fast switching when the load is switched on. The module then reduces the power supply to constant holding voltage. A 30% reduction provides power savings of 50%. The ESM is very compact thanks to the use of state-of-the-art microelectronic and power electronic components. Overexcitation time and holding voltage can be factory-programmed to customer demands.

Thanks to extremely compact design the overexcitation rectifier "Slim Collection" can be installed in very restricted space. The module features a central bore for screw fixing inside the terminal box. It can also be installed by using an adhesive pad.

Motorized rope winches, serial production and on request. Cable winches tailored to your individual requirements. Electric, hydraulic und pneumatic cable winches tailored to your individual requirements.

Electrostatics disturb almost all production processes. Eltex systems prevent uncontrolled discharges and integrate electrostatics precisely into your processes. In our electrostatic discharge product portfolio, you will discover systems and products for many industrial sectors. R45 discharging bars for actively discharging electrostatic interference during the production process. The bars are operated with an AC voltage of 5 or 6 kV at 50 to 60 Hz and are suitable for the discharge of moving surfaces. A high discharging range as well as a large depth effect thanks to the patented isolated grounding conductor.

The Eltex cable rewinders are the optimal accessory for our grounding devices or, in the passive version, also as a simple grounding cable reel for safe storage of the grounding cable and the grounding clamp. In addition to the well-known 601KR/BW passive rewinding cable reel with 9 m grounding cable in a plastic casing, the new 601KR/EW rewinding cable reel is available in an impact-resistant aluminum casing and can hold a grounding cable of up to 12 m. These reels can be used in Zones 1 and 21. Both reels are designed for wall mounting, but the 601KR/EW can also be swivel-mounted using a mounting bracket. A coupling plug can be used to easily connect the passive 70SG and 70PK clamps with the coupling bushing of the grounding cable.

Electrostatic Innovations from Eltex have been creating safety in hazardous areas for over 60 years: Controlled electrostatic grounding protects production sites and employees when handling highly flammable and explosive substances. The TERRACAP TCB040 grounding system is used to ground tanker trucks. If a connection has sufficient low resistance when the grounding clamp is attached, the device discharges electrostatic charges safely via a resistor preventing spark discharge. The device then checks the capacity detected at the clamp. If the capacity for the tanker truck is correct, a green display lights up and the interlocking relay enables the pumping process. The device then forms a low-resistance connection to the ground, which prevents further build-up of electrostatic charges.

Electrostatics disturb almost all production processes. Eltex systems prevent uncontrolled discharges and integrate electrostatics precisely into your processes. In our electrostatic discharge product portfolio, you will discover systems and products for many industrial sectors. The ES53 complies with the requirements of the EX approval BAS98ATEX2179X (discharging bar) and PTB00ATEX2071X (blower head). It is characterized by 5 plug-type high voltage outputs, stable 5 kV AC output voltage, small dimensions, easy installation, solid design in protection class IP 54, function and malfunction monitoring of the bars with floating signal contacts (optional).

The new POWER CHARGER units cover various performance stages and charging applications. They can be operated either with a supply voltage of 24 V DC or a line voltage in the range of 85 V – 264 V AC. The output voltage is 75 or 150 watts. A membrane keyboard or an optionally available, integrated touch panel is used to control the generators. POWER CHARGER units can be operated using analog operation or via digital fieldbus interfaces. A control system that uses CANopen and ModbusTCP and other fieldbus standards are available.

In our product area you will discover Eltex charging systems for many industrial sectors. Do you have special requirements, such as small production quantities or little space? Are you interested in solutions for electrostatic charging? Simply contact our consultants – and find the right charging system and solution to optimize your processes with electrostatic charging. Target-specific application of the required charge through the adjustable geometry of the charging points. This arrangement is needed, for instance, for tacking small surfaces (labels) using electrostatic power. Suitable for edge zone fixing during film and foil production.

Electrostatic Innovations from Eltex have been creating safety in hazardous areas for over 60 years: Controlled electrostatic grounding protects production sites and employees when handling highly flammable and explosive substances. Terrabox TCB030 is designed for direct installation in explosion hazard areas (Zone 1 or 21)and for connecting a clamp. Two clamps are connected when used for BIG BAG grounding. The dual-color indicator lamp signals the correct grounding state. The integrated contacts allow an enable circuit to be implemented.

Description In digital high speed printing, paper loses moisture during drying. The moisture loss leads to considerable quality and efficiency issues. Electrostatic remoistening increases the water content in the paper after drying, returning to the level required and thus improves quality and productivity throughout the entire process chain. The contactless remoistening system DIGIMOISTER 1500 can be installed in any new or existing digital high speed press. The pre-charging and the two-substance nozzle technology are patent protected. Advantages: Precise remoistening results at highest production speeds Flat books or signatures Less electrostatic charges on the paper Dimensional stability (no expansion) No broken fibers in the paper Operation: Intuitive operation via a user friendly touchscreen remote control Easy set-up of web width and water amount Low maintenance costs

Electrostatics disturb almost all production processes. Eltex systems prevent uncontrolled discharges and integrate electrostatics precisely into your processes. In our electrostatic discharge product portfolio, you will discover systems and products for many industrial sectors. Small and compact in size, this unit stands out against conventional transformer solutions both in its small dimensions and low weight. Independent from international variations in line voltages, Compact Power ES24 delivers ultimate flexibility in use. This power supply can be used as voltage supply for all Eltex discharge electrodes and blower nozzles in non-hazardous areas.

The Eltex cable rewinders are the optimal accessory for our grounding devices or, in the passive version, also as a simple grounding cable reel for safe storage of the grounding cable and the grounding clamp. The cable rewinders 607KR rewind the grounding cable after use of the ground contactor, protecting the cable from damage. Several versions are available: The cable rewinders 601KR/AW and 601KR/DW come in an impact resistant aluminum casing and the cable rewinder 601KR/KW comes in an impact resistant plastic casing. All cable rewinders are appropriate for use in the explosion hazardous areas 1 and 21. Different designs of ground clamps are available.

In the past, Eltex Remoistening systems have guaranteed high quality printed products mainly on fastrunning and wide machines. The WEBMOISTER 3000 ensures high-quality products in all heatset web offset machines. Using a new nozzle concept, both lighter and heavier grammages can be remoistened at all web speeds with ultimate precision and homogeneity. The new pneumatic atomizing nozzles are capable of applying smallest water quantities without developing waste water. The modular structure of the nozzle bar allows the WEBMOISTER 3000 to remoisten paper webs in widths of as much as 3 meters. In heatset web offset printing, paper loses moisture during drying. The WEBMOISTER 3000 remoistening system increases the water content in the paper after drying, returning to the level required and thus guarantees high quality in all heatset web offset products.

Electrostatics disturb almost all production processes. Eltex systems prevent uncontrolled discharges and integrate electrostatics precisely into your processes. In our electrostatic discharge product portfolio, you will discover systems and products for many industrial sectors. The Eltex STATICTUBE RX11 tube ionization system was developed for use in pneumatic conveying systems. It removes static charges that are generated on the transported material during transport. The system is used in paper and plastic edge strip extraction systems.

Electrostatics disturb almost all production processes. Eltex systems prevent uncontrolled discharges and integrate electrostatics precisely into your processes. In our electrostatic discharge product portfolio, you will discover systems and products for many industrial sectors. Micro-components and instrument manufacturing require the smallest of tolerances – that is precisely where electrostatic charges can be particularly vexing and noticeably disrupt the production process. Conventional electrostatic solutions are too large in size and too inflexible to provide relief here – but the STATICJET RX22 solves this problem. With its compact dimensions, low weight, and independence from internationally varying supply voltages, the STATICJET RX22 can easily be used anywhere and thus brings reliable Eltex quality to each production process.

Electrostatics disturb almost all production processes. Eltex systems prevent uncontrolled discharges and integrate electrostatics precisely into your processes. In our electrostatic discharge product portfolio, you will discover systems and products for many industrial sectors. The Eltex CombiBlow CB160, 161 offers the best ionization power at a distance of up to 1 m thank to its combination of ionization and blast air. The CombiBlow does not need an external compressed air connection because it has an installed, two-stage blower. The CB16x is specifically used for film winders and in injection molding, but can also be used universally in other application areas that require ionization over long distances.

Electrostatics disturb almost all production processes. Eltex systems prevent uncontrolled discharges and integrate electrostatics precisely into your processes. In our electrostatic discharge product portfolio, you will discover systems and products for many industrial sectors. All Components such as power supply units, output stages and module technology are integrated into the lean electrode profile of the new Smart Discharging System SDS. This system’s communication with machine/operator networks or operation via mobile end devices is particularly smart. The Smart Discharging System SDS is ideal for discharging in the middle distance and speed range for applications in automation technology and in the plastics and packaging industry.

Electrostatics disturb almost all production processes. Eltex systems prevent uncontrolled discharges and integrate electrostatics precisely into your processes. In our electrostatic discharge product portfolio, you will discover systems and products for many industrial sectors. The BASIX discharge system consists of the ES47 power supply unit and the R47 discharge bar; they are available for active discharge of electrostatic disturbances in the production process and are suitable for discharging moving surfaces. Due to different surface charge profiles on the materials, charges of both polarity are provided by the discharge bars. Due to its compact dimensions, BASIX is suitable for a wide range of applications in the plastics, printing, packaging, textile and optical industries.

Electrostatics disturb almost all production processes. Eltex systems prevent uncontrolled discharges and integrate electrostatics precisely into your processes. In our electrostatic discharge product portfolio, you will discover systems and products for many industrial sectors. In all situations where great or changing distances have to be bridged and very high electrostatic charges have to be dissipated, the latest Eltex innovation, the IONSTAR RX3 discharge bar, comes into its own. The intelligent sensor system of the Ionstar RX3 continuously detects the distance and the available charge of the object to be discharged and automatically adapts the output power to the existing conditions. The system offers excellent discharging options, such as those for reeler systems.

Electrostatics disturb almost all production processes. Eltex systems prevent uncontrolled discharges and integrate electrostatics precisely into your processes. In our electrostatic discharge product portfolio, you will discover systems and products for many industrial sectors. The BASIX discharge system consists of the R47 discharging bar and the ES47 power supply unit; these available items actively discharge electrostatic interference during production and are ideal for discharging moving surfaces. Because the materials have different surface charging profiles, the discharging bars feature charges of both polarities. Thanks to its compact dimensions, BASIX can be used for a variety of applications in the plastics, printing, packaging, textile and optics industries.

In our product area you will discover Eltex charging systems for many industrial sectors. Do you have special requirements, such as small production quantities or little space? Are you interested in solutions for electrostatic charging? Simply contact our consultants – and find the right charging system and solution to optimize your processes with electrostatic charging. Heavy-duty precision bar for supply voltages up to 60 kV. The charge and field distribution have been substantially improved by the optimized arrangement of the individual bars. Separate current-limited tips prevent an increase in air ionization and high-energy brush discharges.

Electrostatics disturb almost all production processes. Eltex systems prevent uncontrolled discharges and integrate electrostatics precisely into your processes. In our electrostatic discharge product portfolio, you will discover systems and products for many industrial sectors. The ES51 features 5 plug-type high voltage outputs, stable 5 kV AC output voltage, small dimensions, easy installation, solid design with protection class IP 54, function and malfunction monitoring of the bars with floating signal contacts (optional).

In our product area you will discover Eltex charging systems for many industrial sectors. Do you have special requirements, such as small production quantities or little space? Are you interested in solutions for electrostatic charging? Simply contact our consultants – and find the right charging system and solution to optimize your processes with electrostatic charging. A universal bar with minimal dimensions for supply voltages up to 60 kV. It is used to charge surfaces for blocking and tacking purposes. The charging bar is mainly used where production processes and cycles run faster and with less interference if the materials used (such as films, foils, papers, etc.) adhere to each other. The parallel configuration of two or more bars allows surface-covering charging or operating the unit at high web speeds.

Uncontrolled electrostatic discharges when handling highly flammable or explosive media often cause personal injuries and damage to equipment. With smaller containers such as drums, buckets and canisters, the risk of electrostatic sparks is often underestimated. For these simple, but no less dangerous processes, Eltex has developed the TERRALIGHT battery-operated ground monitoring system. The TERRALIGHT grounding system shows the user that a correct dissipative ground connection is present and thus ensures a high level of safety when handling highly flammable media. Mobile ground monitoring, e.g. on mobile suction/pumping stations or containers, is also possible. For a safe ground contact, the contactor/clamp is important as an interface between the grounding device and the object to be grounded. For the TERRALIGHT we offer the TERRACLAMP with built-in grounding indicator. The user can see directly on the clamp if the grounding has been done correctly