Tape%20measures - Import export

Magnetic tape, magnetised plastic sheet. Carrier band steel. Cover band stainless steel. Version Scale with incremented coding. Pole length 5 mm. Note Simple adhesive mounting; selfassembly possible. Required tape length calculated from measuring path + sensor length "L" + (2 x run or return "B"). L = see drawing of sensor used. B = 10 mm (run and return). Technical data Coefficient of expansion (11 ± 1) x 106/K (spring steel) Temperature range Ambient temperature 20–70°C Storage temperature 40–70°C Assembly Installation using the preaffixed doublesided adhesive tape must be carried out according to the enclosed user information. On request Other lengths from 0.1–100 m, in increments of 0.1 m. Note Relative humidity 100%. Dewing is permissible. Drawing reference 1) Cover band A = 0.176 mm 2) Magnetic tape M = 1.0 mm 3) Carrier band T = 0.3 mm 4) Adhesive tape K = 0.1 mm 5) Required tape length = measuring path + L + 2 x B 6) Measuring path

To accompany the Sam3D Lite or Lite+ software, a kit is available for carrying out postural diagnostics in a mobile version. The kit includes: Sam3D LITE image acquisition device Carrying case Sam3D reference ground plate Compact tripod Sam3D LITE / LITE+ analysis software Connection cable Tape measure Marking pen

Instrumentation accessory for setting and commissioning the measuring instrument A manifold is mounted to the interface between the pressure taps and the transmitter. It is used to isolate the transmitter in case of intervention on the pipe. It also allows you to reset the zero of the transmitter or purge the impulse taps.

Suitable for short straight lengths and low flow ratesSolder (BW) or flanged connection Material: Standard: carbon steel, stainless, others according to your application

Simple, economical and leak-free installationMounting between flanges: ISO PN 2,5 to PN 420, ASME 150 # to 2500 #, others on consultation. Material: Standard: 304L / 306L stainless steel, others according to your application.

Suitable for low flow rates and fluids with impuritiesSolder (BW) or flanged connection Material: Standard: 304L / 316L stainless steel, others according to your application.

Suitable for flow measurement in large pipes, for installations with low pressure dropAverage measurement over the entire length of the tube. Installation on the pipe: compression fitting, flange ISO PN 2.5 to 420 or ASME 150 # to 2500 #, retractable. Material: Standard: 304L / 316L stainless steel, others according to your application.

Complete and flexible measuring element to facilitate on-site installationMounting of the primary element between flanges: ISO PN 2.5 to PN 420, ASME 150 # to 2500 #, others on consultation. Solder (BW) or flanged connection Material: Standard: carbon steel, stainless steel, others according to your application.THE FLOWMETER INCLUDES: the desired orifice (orifice plate, nozzle) the flanges to fix the orifice upstream and downstream straight lengths in accordance with the chosen standard ASSEMBLY AND ASSEMBLY DATA: The design, manufacture and assembly are carried out in our workshops in compliance with the standards (upstream and downstream pipe roughness, centering of the primary element, circularity of the piping, upstream and downstream straight lengths) in order to achieve optimal measurement accuracy. CHARACTERISTICS : orifice plate - see corresponding technical data sheet nozzle - see corresponding technical data sheet upstream, downtrseam straight lengths

Complete measuring element with special flanges - Suitable for pipe diameters ≤ 40 mmInstallation of the integrated sharp-edge orifice plate: between special flanges (direct mounting of the manifold and the differential pressure transmitter) Solder (BW) or flanged connection Material: Standard: carbon steel, stainless steel, others according to your application.

the desired orifice (orifice plate, nozzle) the flanges to fix the orifice the pressure taps (at the flange or in the corners, depending on the primary element chosen) and the impulse tubes integrated or remote 3 or 5 way manifold the preset differential pressure transmitter the built-in temperature sensor (for temperature compensation) in option MOUNTING AND ASSEMBLY DATA: Optimized centering of the measuring element Honing of upstream and downstream pipes to meet roughness criteria Temperature and pressure compensation for gases to achieve very accurate flow measurement Remote mounting of the instrumentation according to the applications CHARACTERISTICS : For orifice plates: see corresponding technical data sheet For nozzles: see corresponding technical data sheet Straight lengths upstream, downstream, roughness and circularity of the tubes, centering measuring element: see details on the FAQ tab on this page ACCESSORIES : Temperature sensor: Sensor mounted on downstream

All cork pieces are 100% handmade from high quality Portuguese cork and environmental friendly methods. This bracelet is made with a silver clasp and natural cork: color combinations available on the options above. You can choose from the options bellow your bracelet size. Measures: 16 cm, 17 cm, 18 cm, or custom --- BRACELET SIZES: --- USE A FLEXIBLE MEASURING TAPE OR PIECE OF STRING AND MEASURE ABOVE YOUR WRIST BONE. IF USING STRING MEASURE THE LENGTH OF THE STRING CORRESPONDING TO YOUR WRIST CIRCUMFERENCE WITH A RULER. DON'T ADD ANY EXTRA LENGTH - I WILL ADD SPACE FOR A COMFORTABLE FIT. FIND THE CORRESPONDING FROM THE DROP DOWN MENU